z3 rack swap questions

[bimmerboy4444]

will the z3 tie rod ends work in e30 steering knuckle?

if not is thar a tie rod end that will work with z3 inner tie rods?

can't seem to find a answer i gess most people swap over thar e30 tie rods.

[mr ilia]

Either e36 or e30 tie rods will work. You will have to use both, inner and outer, from the same model car, cant mix them up. I personally used e30 inner and outer only because they were cheaper for the same brand (Krailyn)

[bimmerboy4444]

alright i will have to ues e36 end then the rack(95 z3 1.9L) i am going to order has inners alredy. thanks for the info

[cojo]

z3 tie rods

I just did this swap and had the same question, ended up using the z3 tie rods as they came with the rack and were in better shape. Also a bit beefier than the e30 tie rods.