Coilovers that dont have to be welded

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • acolella76
    replied
    Yeah it seems like its in a good location, just never seen it there before! And that makes sense... I was under the assumption you were using a stock rubber rear mount and not a solid one. Nevermind! haha

    Leave a comment:


  • XvillainousX
    replied
    Originally posted by acolella76
    That adjuster is really weird on the front...
    The adjuster is actually easy to get to. You get used to it.

    Originally posted by acolella76
    and I certainly wouldn't use the OEM style rear shock mount, but if it worked for you then great! I have heard good things about Gaz from European fellows.
    The pic of the e30 m3 is just some pic I got off the net. I personally used their spherical bearing shock mount nd Ground Control race camber plates.

    Leave a comment:


  • acolella76
    replied
    That adjuster is really weird on the front... and I certainly wouldn't use the OEM style rear shock mount, but if it worked for you then great! I have heard good things about Gaz from European fellows.

    Leave a comment:


  • XvillainousX
    replied
    OP you may want to research Gaz coilover (UK manufacturer). They make several versions (street - trackday enthusiast - race). I personally ran the race set up with coilover rear setup and m3 tabs on mine. Previously you used to have to send in your old strut to have them modified. Now I think you can just pay a core charge. In a nutshell they come ready to install.

    Buy fully adjustable shock absorbers and coilovers direct from GAZ, the UK manufacturer. Built to order for road, track and classic cars since 1967.




    Leave a comment:


  • robgoesvroom
    replied
    Originally posted by einstein57
    Not sure how many clicks these have but they are only about $600 for the pair.
    http://www.koniracing.com/8611.cfm
    12 compression, rebound is like 2.5 revolutions - no "clicks". I think these are the ones I have in my car

    Leave a comment:


  • PNWDan
    replied
    Originally posted by mkcman17
    Agreed, my car was THE tester car for the GE stuff, we went through a lot of spring rates and heights, and with 6" spring and camber plates we found I could still get reasonably low (see sig) and still have a very live-able ride. The 4" springs are unbearable.
    Exactly what I'm running on mine

    Leave a comment:


  • berlow94
    replied
    And FYI. The best dampers in the suspension world don't even have "clicks".

    Leave a comment:


  • einstein57
    replied
    Not sure how many clicks these have but they are only about $600 for the pair.
    KONI is the world leader in adjustable shock absorber technology with over 50 years of worldwide racing success.

    Leave a comment:


  • acolella76
    replied
    Hahaha, what makes you think you need something with over 30 clicks of adjustment? The only shocks I would bother with that have that kind of adjustment are Ohlins, and they will cost you about 2 E30s. Nice S52 swapped E30s.

    Leave a comment:


  • einstein57
    replied
    Easiest way to go about it is to build it at the junk yard. Find an 88 528e at the yard and take out the block. Grab an "i" head, oil pan,wiring harness, DME, and coolant cross pipe from a 325i. Bolt it together and bring it to the counter. Should not cost more then $200. Then you can take your time going through it replacing seals and what not with out having to rush it. You can drop in your freshly detailed and assembled motor all in one day. Then add boost :twisted:

    Leave a comment:


  • jwiles
    replied
    Originally posted by mkcman17
    You sound like me a couple years ago. The datsun truck is still in the family though.

    2.7i swap first. It'll be worth the minimal investment.

    whats a good form, or parts list for the swap. I just ran across a hot deal on an i engine and its comp if i need it.

    Leave a comment:


  • jwiles
    replied
    haha " my great domestic car " cant make it past 100,xxx miles with out a new engine

    Leave a comment:


  • mkcman17
    replied
    To an extent. As long as the TB doesn't go out, an m20 will take a lot of negligence/abuse.

    Leave a comment:


  • jwiles
    replied
    I just got finished with my Auto:Maunal swap and i swear im Itching like a mofo with poison ivy.

    i swear if E30's are anything like the datsun truck these will be around for ever even if you have it strapped to the top of a building " Top Gear" and they still start

    Leave a comment:


  • mkcman17
    replied
    You sound like me a couple years ago. The datsun truck is still in the family though.

    2.7i swap first. It'll be worth the minimal investment.

    Leave a comment:

Working...