No rear spring adjusters...

[MNE30]

Today I was putting in some new shocks on my back tires and noticed that my rear springs (JOM coilovers) have no adjusters, it just has the one collar so it can be as low as it can go. Normally I wouldn't care, but my new tires are sitting on the fenders and that's proving problematic.

So... is there a way I can DIY a 1" lift or am I going to have to buy adjusters.

Or, could I just get something like H&R springs for the rear and lift up the coils in the front to match a little bit? So basically have coils in the front and just springs in the rear?

[FLG]

Spring pads will add some height.

Sent from my Galaxy Nexus using Tapatalk 2

[MNE30]

There are some spring pads in there but they look... worn.

Not very thick, I'll look into some thicker ones, thanks.

[bigredguy]

I have a pair of rear adjusters for JOM coilovers that I no longer use. Granted I dont need to raise my car when I put my 15x9.5 et-5s in the rear Ill let them go. Just shoot me a PM

[SkiFree]

Well if it helps, here's a .32inch rear spring pad.

http://www.iemotorsport.com/bmw/E30-suspension-steering/e30rspcr.html