Announcement

Collapse
No announcement yet.

too low... need help or advice!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    too low... need help or advice!

    I just moved into a rental house with a really steep driveway and i got the bottom down fine. The problem is when i go into the garage my header flanges literally eat at the concrete. anyone have a solution?

    car is a 1987 325i vert
    suspension is (PO installed so not positive) bilstein sports with cut h&r springs.
    i dont think it matters but before i swapped to an m50 i could get in the garage fine. now like i said before the headers just tear into the ground and im scared im gonna rip them off.


    Any solutions or advice?


    thanks in advance for the help!


    87 325iM50 VanosVadersBilstein SportsH&R Springs

    #2
    Change the springs for non-cut H&R. Seems like a no-brainer...
    BimmerHeads
    Classic BMW Specialists
    Santa Clarita, CA

    www.BimmerHeads.com

    Comment


      #3
      Install springs that raise your ride height or go up a series on tire sidewall.
      Lorin


      Originally posted by slammin.e28
      The M30 is God's engine.

      Comment


        #4
        Chisel+hammer+driveway.
        For all things 24v, check out Markert Motorworks!
        Originally posted by mbonanni
        I hate modded emtree, I hate modded cawrz, I hate jdm, I hate swag, I hate stanceyolokids, I hate bags (on cars), I hate stuff that is slowz, I hate tires.

        I am a pursit now.

        Comment


          #5
          Stock springs + a hockey puck lift
          sigpic

          Comment


            #6
            I was thinking that but I don't really wanna be a 4x4.. If I put 17s on instead of 15s would it raise my car?


            87 325iM50 VanosVadersBilstein SportsH&R Springs

            Comment


              #7
              Airbags

              Comment

              Working...
              X