My front right sway bar mount is completely sheared off, caused right height issues and the left mount is still there. What the best way to fix this, a new subframe? I looked around for a kit weld on but didnt find anything.
-
-
If you aren't afraid of welding, you could make two strips of metal the length of the bracket, drill and tap two holes in them and weld this to the subframe. -
I've had a couple guys use the weld-on reinforcements as new tabs, then of course strengthen it up a bit more.Comment
-
Alright, sounds like thats the plan of action. Might as well reinforce the other side as well.Comment
Comment