Wheel hop?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • THEhomelessONE
    replied
    Hey I recently posted a thread on the same topic. I have all new delrin bushings, csb, 800r, lsd, agx's on full stiff, gc shock mounts, 225/50 re11's and still have wheel hop. I think it's just due to the IRS, nothing else left to change.

    Leave a comment:


  • JFarhanbod
    replied
    Originally posted by MR 325
    Right when I read your post I was going to say CSB!

    Looks like a manual swap is coming soon!

    Leave a comment:


  • MR 325
    replied
    Right when I read your post I was going to say CSB!

    Leave a comment:


  • JFarhanbod
    replied
    My sense of feel sucks haha. Went to JMP turns out it's the csb. Going to do the entire rear end soon anyways though.

    Leave a comment:


  • JFarhanbod
    replied
    Checked the diff bushing, it's toast. Not sure about the subframe bushings the look like they might be bad too.

    Rear shock mounts are billet and seemed to be be in good condition

    Leave a comment:


  • Gesture
    replied
    It could be worn out rear shock mounts or improperly installed aftermarket rear shock mounts.

    Leave a comment:


  • JFarhanbod
    replied
    Originally posted by NitroRustlerDriver
    Blown shocks would cause this.

    Shocks are brand new w124 billy sports


    Gonna check the bushings in a bit

    Leave a comment:


  • AndrewBird
    replied
    Blown shocks would cause this.

    Leave a comment:


  • mcr_driver
    replied
    Get a jack get down there and check the bushings sound like the right side went bye bye. If the subframe stuff is good maybe the wheel bearing? No whirring noise I assume to rule that out?

    Leave a comment:


  • Luke Girard
    replied
    I had the same problem with my e30 and I was told possibly the driveshaft, shocks, bushings, or axles. You should have a shop look at it if you can't figure it out yourself. If you can find the problem props too you! =) hope that helps check those things out!

    Sent from my DeLorean

    Leave a comment:


  • RedReplicant
    replied
    My 240SX did this when the subframe bushings were completely destroyed. If you're gonna replace one of the bushings back there you may as well drop the subframe and do the offset subframe bushings, RTABs, and diff bushing all at once.

    Leave a comment:


  • JFarhanbod
    replied
    Originally posted by efficient
    you sure your lugs are tight and not coming loose

    Yep they're tightened

    Leave a comment:


  • JFarhanbod
    replied
    Originally posted by IRON-E
    Bald tires have no grip.

    That's exactly what it feels like but the tires are brand new 595 rsr's. It did it on my bcaps too.

    Leave a comment:


  • efficient
    replied
    you sure your lugs are tight and not coming loose

    Leave a comment:


  • IRON-E
    replied
    Bald tires have no grip.

    Leave a comment:

Working...