Front coilover set up for drag racing

[ForcedFirebird]

Here are 150 lb springs with a 2.25 inch ID, you can get all the pieces to mount them to your strut tubes there as well. Not sure if you are looking for low prices or top of line components. Hard to beat $19.99 each !

http://www.speedwaymotors.com/Garage...lbs,68330.html

Problem is with adjusters on the front, you need 2.5" springs.

[LJ851]

Here are 150 lb springs with a 2.25 inch ID, you can get all the pieces to mount them to your strut tubes there as well. Not sure if you are looking for low prices or top of line components. Hard to beat $19.99 each !

http://www.speedwaymotors.com/Garage...lbs,68330.html

[Good & Tight]

It took a lot of convincing but gc actually sold me only the front setup, however I had to prove I had their stuff in the rear lol.

That's the thing, I need a front setup only too, once I told the GC sales guy I had TC Kline coil overs in the rear he immediately said "Oh deff can't sell you the fronts"
WTF ? Guess they have their reasons as stupid as it may be.

[Balleristic31]

It took a lot of convincing but gc actually sold me only the front setup, however I had to prove I had their stuff in the rear lol.

[ThatOneEuroE30]

What's a welder..? lol
I'm interested for sure, have a track event Jan 18th, just ordered 24" MT bias ply for the fronts. Currently have J stock springs in the front w/23" tires need some weight transfer to the back.
Shoot me a PM or email.

Do you have any pics of your cars bay? I'd really like to see your turbo setup.

[e30 gangsta]

Fortune auto could set you up with something for sure. Custom valving/spring rates and camber plates.

[Good & Tight]

I know you can weld. I can put together a no-frills you-weld-it kit for decent monies.

Spring rates.... depending on length
7" length start at around 275lbs
8" length start at around 150lbs

What's a welder..? lol
I'm interested for sure, have a track event Jan 18th, just ordered 24" MT bias ply for the fronts. Currently have J stock springs in the front w/23" tires need some weight transfer to the back.
Shoot me a PM or email.

[SkiFree]

I know you can weld. I can put together a no-frills you-weld-it kit for decent monies.

Spring rates.... depending on length
7" length start at around 275lbs
8" length start at around 150lbs

[Good & Tight]

Guys where can I buy a coil over conversion just for the front?
Car is used for drag racing and currently have TC Kline 1000# coil overs in the rear with J stock springs in the front.
Need stock ride height w/adjustment with a soft spring like 150# rate. Is there such a spring rate for coil overs?