Ground control coilover conversion help

[deeze30]

Does anyone know if anyone offers cutting and welding for the conversion in the Bay Area? I dont have tools nor a welding machine to do the job

[SkiFree]

BTM Motorworks, A1 Imports, North Bay Bavarian .... all jump to mind.

[deeze30]

BTM Motorworks, A1 Imports, North Bay Bavarian .... all jump to mind.

How much do you think they run? Probably depends. I would borrow a cutter try to cut the perch myself but definitely not welding but if price is reasonable for everything i'd probably just get it done professionally hehe

[DRTSRFR]

Are you shortening the housings?

If not, and you're only doing the weld rings, any shop that welds can do it.

I would expect to be charged an hour for each housing if you don't remove the factory perches yourself.

If you do remove the perches yourself, it shouldn't take more than 15 minutes to do each housing.

The link in my sig has a basic how-to on removing the factory perch.

[deeze30]

I opted for h&r and billy combo