New Cheaper Koni shocks? $50 each?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TimKninja
    R3VLimited
    • Mar 2009
    • 2131

    #1

    New Cheaper Koni shocks? $50 each?

    Was perusing tire rack. Saw these?



    Whos gonna be the first to experiment? They claim they "Compliment Shorter springs"
    1985 325e M50TU(Sold)
    1991 318is Slicktop (Sold)
    1990 325is Brilliantrot S50/5 Lug Swapped.
    1992 525i Manual shitbox Winter Beater
  • agent
    Vice Grand Pubaa
    • Mar 2010
    • 7960

    #2
    Apparently no one until 6/26/15.
    Originally posted by kronus
    would be in depending on tip slant and tube size

    Comment

    • Herr Faust Schinken
      No R3VLimiter
      • Feb 2012
      • 3580

      #3
      Originally posted by TimKninja
      they aren't adjustable btw
      88 325is Five Speed
      Lachssilber

      Comment

      • ELVA164
        R3V Elite
        • Dec 2011
        • 4861

        #4
        Originally posted by Herr Faust Schinken
        they aren't adjustable btw
        BIG minus in my book, but I guess we'll have to see what the valving is like for most guys. Might work out well!
        Interested in vintage cars? Ever thought about racing one? Info, photos, videos, and more can be found at www.michaelsvintageracing.com!

        Elva Courier build thread here!

        Comment

        • DRTSRFR
          E30 Mastermind
          • May 2008
          • 1836

          #5
          STR.Ts are basically factory replacement dampers.
          The valving is very similar to KYB GR-2s.
          Suspension tips here...
          http://www.r3vlimited.com/board/album.php?albumid=757

          sigpic

          Comment

          • Luke_M
            Wrencher
            • Aug 2011
            • 258

            #6
            I was told by Ground Control that the STR.T's were valved about the same as a Koni Sport set to full soft. They may have said "the exact same as", I can't remember to be honest.
            Euro S50 Daily Driver: http://www.r3vlimited.com/board/showthread.php?t=279195

            Comment

            • DRTSRFR
              E30 Mastermind
              • May 2008
              • 1836

              #7
              Not even close.

              I was involved with them being dyno'd at GC.

              They're only slightly firmer than stock. On anything firmer than a sport spring, they will have some bounce. The firmer you go the worse they get.
              Suspension tips here...
              http://www.r3vlimited.com/board/album.php?albumid=757

              sigpic

              Comment

              • Luke_M
                Wrencher
                • Aug 2011
                • 258

                #8
                Originally posted by DRTSRFR
                Not even close.

                I was involved with them being dyno'd at GC.

                They're only slightly firmer than stock. On anything firmer than a sport spring, they will have some bounce. The firmer you go the worse they get.
                That's very interesting and helpful (and not what i was told over the phone last week from Donovan). Small mistake I guess.

                Do you think that's pretty much the same across different platforms?
                Euro S50 Daily Driver: http://www.r3vlimited.com/board/showthread.php?t=279195

                Comment

                • DRTSRFR
                  E30 Mastermind
                  • May 2008
                  • 1836

                  #9
                  Yes, they are only slightly stiffer than stock. On inexpensive "performance" oriented dampers the valving is increased a bit with the expectation they may be used with simple lowering springs which are only 10-15% firmer than what was supplied with the car.
                  Suspension tips here...
                  http://www.r3vlimited.com/board/album.php?albumid=757

                  sigpic

                  Comment

                  • TimKninja
                    R3VLimited
                    • Mar 2009
                    • 2131

                    #10
                    SO theyd probably not be great for My H&R sports. Maybe a better combo for vogtlands.

                    Good to have somebody here who knows what their talking about!
                    1985 325e M50TU(Sold)
                    1991 318is Slicktop (Sold)
                    1990 325is Brilliantrot S50/5 Lug Swapped.
                    1992 525i Manual shitbox Winter Beater

                    Comment

                    • noahsense
                      Advanced Member
                      • Nov 2008
                      • 102

                      #11
                      It seems like H&R OE might count as firmer than a sport spring? Anyone have experience w/ this combo?

                      Comment

                      • dadsbmw
                        E30 Addict
                        • Oct 2014
                        • 475

                        #12
                        It seems only 2 people have had experience with them so far. First guy doesnt like them much and says they bottom out (however he is running with H&R race) and dont come with all parts needed to install. 2nd guy hasnt really stated his opinion yet. I recently opted to just go with kyb's and am thus far happy with the setup.
                        2003 Z4 3.0 6-speed- Silver, 19's, daily driver
                        1990 Silver 325i- Lowered on H&R OE Sports, e90 drop hats, KYB shocks, color matched rocker panels, 16" Emortal RS wheels on 205/50/16 tires... Currently getting a full refresh including an S52 swap!
                        1997 Black Ford Probe GT- Stripped to 2220lbs, MS3X, Forged motor in midst of assembly... Dyno results and 1/4 mile times pending

                        Comment

                        • TimeMachinE30
                          No R3VLimiter
                          • Jun 2014
                          • 3749

                          #13
                          I just need to drive with mine. I have no opinion at this point.
                          ACS S3 Build / Dinan 5 E34

                          Comment

                          • diggity_1031
                            Noobie
                            • Dec 2010
                            • 33

                            #14
                            any updates on the koni str.t?

                            Comment

                            • M-technik-3
                              I waste 90% of my day here and all I got was this stupid title
                              • Oct 2003
                              • 18946

                              #15
                              Drove an e36 with them a year ago and was not impressed with them.
                              https://www.facebook.com/BentOverRacing

                              Comment

                              Working...