How much camber is too much?

[philakamrbean]

So.... Ill assume I don't need offset cabs as according to the camber gauge. Im -8.x degrees in front and -6.4 in back. Ill shove the camber plates out and see what I get. Hoosier Sm7 are supposed to be around -3.......

But if I were to install offset cabs...reversed would this in theory remove camber? Running 6 inch springs front and 5 out back. Not slammed as I tried to keep the roll center even. Thoughts?

[philakamrbean]

Its an autox track car. Running. 205 50 15 on 7inch wheel with 1\8 toe out currently.

[constructor]

Offset CABs will increase caster. They probably affect camber minimally in the positive direction. Reversed would decrease castor and minimally increase camber

[JRKOUPE]

it depends on so much....tires, set up .....etc etc etc..


for a/x or track at least neg 3 at min...prolly 3-4 is optimum

rears?...I say neg 2 ish

for yrs Ive run 225/50 15 on my track toy...:


neg 3.4

and rear is neg 2.2