Announcement

Collapse
No announcement yet.

Not low enough with BC Gold Coilovers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Not low enough with BC Gold Coilovers

    I've searched for something to help me but i can't find anything so here goes.

    I've got my e30 on BC racing coilovers and i can't seem to get low enough in the rear or near where other people get. I've got only the spring pads in the rear with no height adjustment thing so it sits a little lower, but the top of the fender is only sitting just above the tire, where i've seen people get extremely low with the same setup, and i just don't know how they've done it.

    Please help me

    Thanks Guys

    #2
    If you have a early model the rear arch is two inches higher
    Build Thread
    https://www.r3vlimited.com/board/sho...d.php?t=419655
    Parts Thread
    https://www.r3vlimited.com/board/sho...d.php?t=408302

    Comment


      #3
      Originally posted by Chrisbike View Post
      If you have a early model the rear arch is two inches higher

      Ahhhhh okay that makes sense. Assuming this isn't something that can really be fixed?

      Comment


        #4
        Originally posted by OldE30` View Post
        I've searched for something to help me but i can't find anything so here goes.

        I've got my e30 on BC racing coilovers and i can't seem to get low enough in the rear or near where other people get. I've got only the spring pads in the rear with no height adjustment thing so it sits a little lower, but the top of the fender is only sitting just above the tire, where i've seen people get extremely low with the same setup, and i just don't know how they've done it.

        Please help me

        Thanks Guys
        You need to have the extreme drop version of the BC coilover set. Or get shorter springs, but in that case you will quicly run out of shock travel if you get too short ones.
        Last edited by pazi88; 03-25-2018, 01:01 AM.

        Comment

        Working...
        X