Are camber/caster plates necessary?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • electric zounds
    Noobie
    • Jan 2007
    • 4

    #1

    Are camber/caster plates necessary?

    So I'm new to bimmer suspension. I want to go with a ground control/ koni or bilstein setup but I'm just not sure about the camber/caster plates. Are they necessary, my driving consists mainly of daily driving/highway and the occasional autox during the summer.
    I'm looking for a 325is/ix in the PNW. Let me know what you've got.
  • PeaveyBassist
    No R3VLimiter
    • Sep 2004
    • 3511

    #2
    Not nessescary. GC has adapters that adapt the stock strut bearing to the 60mm or whatever size spring it is.

    Will
    RIP e30 (brilliantrot '91 325i) 11/17/06 Byebye: 8/21/07
    Welcome e30 (brilliantrot '90 325is) 12/23/06
    DaveCN = Old Man
    My signature picture was taken by ME! Not by anyone else!



    Originally posted by george graves
    If people keep quoting me in their sig, I'm going to burn this motherfucker down.

    Comment

    • jlevie
      R3V OG
      • Nov 2006
      • 13530

      #3
      Whether adjustable camber plates are necessary of what is essentially a daily driver depends on how much you lower the car and how much tire wear you find to be acceptable. As the ride height is lowered front camber increases. If the car is really low you can wind up enough camber to fairly rapidly wear the front tires. Adjustable camber plates can allow that excess camber to be dialed back out.
      The car makes it possible, but the driver makes it happen.
      Jim Levie, Huntsville, AL

      Comment

      • Mystikal
        Moderator
        Wheel Fitment Expert
        • Nov 2003
        • 9602

        #4
        Don't bother. Slammed E30's wear tires evenly if you drive them right.

        Comment

        • Erick
          Official R3V Drifter
          • Oct 2003
          • 11169

          #5
          FWIW, Camber/caster plates allow for more shock travel, which in the end, helps out with handling. (Not to mention the camber/caster adjustments). So it's up to you how much handling you need and if it's worth the cost.
          Erick Mahle | FullOpp Drift | YouTube
          EurostopUSA | Dunlop Tires | Ireland Engineering | EnthusiastApparel | Ground Control

          ..::Support FullOpp::..
          FullOpp Stickers for sale!
          NEW | Enthusiast Apparel T-Shirts! | NEW
          Feedback Thread

          Originally posted by Mr. Anderson
          ...one of the most hardcore E30's around. :D

          Comment

          • StereoInstaller1
            GAS
            • Jul 2004
            • 22679

            #6
            I have KYB struts/shocks and B+G springs.

            I ran a set of Yoko ES100s in 215/40/17 to cords in 8,000 miles. Plenty of tire left on the outside edges...all camber wear. I rotate regularly, every 3,000 miles or so.

            I will be doing IE camber/toe kit in the rear. I still do not know what I want to do for the front. Fixed would be OK, as long as I can pull a bit of negative camber out.

            Luke

            Closing SOON!
            "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

            Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

            Thanks for 10 years of fun!

            Comment

            • backtrail69
              R3V Elite
              • Jul 2005
              • 4471

              #7
              My 325 4 dr with Kmac plates, H&R race, M3 Cabs in the front have worn out my front tires very rapidly. It was alligned before I bought the car at a speed shop for a high performance allignment... It probably has 2-3 degrees neg camber. I would have to look at the printout, but its at my moms house...an hour away along with my 325is and my 2002.
              :: PNW Crew ::
              '87 325 4dr, '74 2002

              Comment

              • Erick
                Official R3V Drifter
                • Oct 2003
                • 11169

                #8
                What tires though? If they were Azenis, that's completely understandable.... low treadwear tires dont last anyways.
                Erick Mahle | FullOpp Drift | YouTube
                EurostopUSA | Dunlop Tires | Ireland Engineering | EnthusiastApparel | Ground Control

                ..::Support FullOpp::..
                FullOpp Stickers for sale!
                NEW | Enthusiast Apparel T-Shirts! | NEW
                Feedback Thread

                Originally posted by Mr. Anderson
                ...one of the most hardcore E30's around. :D

                Comment

                • BimmerToad
                  E30 Mastermind
                  • Sep 2004
                  • 1537

                  #9
                  For the occasional AutoX and normal driving, don't bother with them. If you start tracking the car more often, then consider them. They have the potential for making unsettling clunks and take a bit of maintenance to keep in good shape. They really improve front grip by increasing the camber, and add a feeling of more direct steering, but at the cost of noise, additional maintenance, and cost.
                  San Diego BMW repair -> Jake @ www.littlecarshop.com Great guy :up:

                  Comment

                  • Mystikal
                    Moderator
                    Wheel Fitment Expert
                    • Nov 2003
                    • 9602

                    #10
                    Originally posted by BimmerToad
                    For the occasional AutoX and normal driving, don't bother with them. If you start tracking the car more often, then consider them. They have the potential for making unsettling clunks and take a bit of maintenance to keep in good shape. They really improve front grip by increasing the camber, and add a feeling of more direct steering, but at the cost of noise, additional maintenance, and cost.
                    Best answer to date.

                    Comment

                    Working...