Loose springs - IE3

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • jajou318
    replied
    Originally posted by James Crivellone
    Well considering all urethane bushings, ST Sways, M3 Offset, and the Cup Kit I handle very well, and I disagree and did not really enjoy derek's suspension.

    I have very little body roll with my setup, the sways took care of most of that.
    Yea I rode in Abe's (loonibab325i) car at the last auto-x he has Jordan's cupkit and we installed the IE sways rear and front and man I don't think there was much of any body roll. Made the ride a lot stiffer imo.

    Leave a comment:


  • DarkWing6
    replied
    Originally posted by egk2
    Of course Jeff is going to say that it is perfectly normal...

    I also asked him if it was safe, etc. He said everything is fine and there are 1000's of cars out there that have springs like this. I figure if something bad happens I have emails from him saying this is fine and there is no problem. :D

    Leave a comment:


  • egk2
    replied
    Originally posted by DarkWing6
    Wait til I get my sways in. I think those will make a huge difference. I like the setup and have been very happy with it to this point, but to each his own and I respect that.


    BTW - I emailed Jeff Ireland for his input.


    Edit - He responded saying it is completely normal (mind you he makes and sells the things).
    Of course Jeff is going to say that it is perfectly normal...

    Leave a comment:


  • James Crivellone
    replied
    Originally posted by egk2
    Seems like you need a lot of reinforcement just to make
    a cup kit handle ok, when IE's or KW's and some good dampers handle
    very good without all the extras.
    As you can tell by my projects in general, I like doing alot of extra work.
    Cup kit is fine =)

    Leave a comment:


  • DarkWing6
    replied
    Originally posted by James Crivellone
    Well considering all urethane bushings, ST Sways, M3 Offset, and the Cup Kit I handle very well, and I disagree and did not really enjoy derek's suspension.

    I have very little body roll with my setup, the sways took care of most of that.

    Hows that clutch replacement going? And you work non stop on restoring a car for a year, it gets old.

    And sorry but I will not have suspension that has uncaptive springs, even if I take a handling hit for it.

    Wait til I get my sways in. I think those will make a huge difference. I like the setup and have been very happy with it to this point, but to each his own and I respect that.


    BTW - I emailed Jeff Ireland for his input.


    Edit - He responded saying it is completely normal (mind you he makes and sells the things).

    Leave a comment:


  • backtrail69
    replied
    Originally posted by MR 325
    This thread is ridiculous and James you are being unrealistic.
    Your Mom is ridiculous. hehe

    Leave a comment:


  • MR 325
    replied
    This thread is ridiculous and James you are being unrealistic.

    Leave a comment:


  • Sam Lin
    replied
    Originally posted by Mystikal
    Not at all. If I cared enough, I'd jack up my subframe to show you how fast GC rear springs lose tension. Completely falling out is another story though.
    And unless you have air jacks, that'd be a totally worthless comparison, as the rate of unloading caused by catching air from a bump and the rate of unloading caused by frantic jacking is orders of magnitude different.

    Sam

    Leave a comment:


  • Kruzen
    replied
    Originally posted by James Crivellone
    Well considering all urethane bushings, ST Sways, M3 Offset, and the Cup Kit I handle very well, and I disagree and did not really enjoy derek's suspension.

    I have very little body roll with my setup, the sways took care of most of that.

    Hows that clutch replacement going? And you work non stop on restoring a car for a year, it gets old.

    And sorry but I will not have suspension that has uncaptive springs, even if I take a handling hit for it.
    I really can't imagine a situation where IE3's would come magically popping out, they sit in their loose when everything is completely unbolted from the car but they're by no means eays to remove still.

    Leave a comment:


  • egk2
    replied
    Seems like you need a lot of reinforcement just to make
    a cup kit handle ok, when IE's or KW's and some good dampers handle
    very good without all the extras.

    Leave a comment:


  • James Crivellone
    replied
    Originally posted by Kruzen
    Not much body roll in the garage eh? :p

    Having ridden and driven in stock suspension, cup kit cars, and cars setup like derek's or mine, I definitely think IE3 with bilstein or koni's handles much better than a cup kit setup. my .02
    Well considering all urethane bushings, ST Sways, M3 Offset, and the Cup Kit I handle very well, and I disagree and did not really enjoy derek's suspension.

    I have very little body roll with my setup, the sways took care of most of that.

    Hows that clutch replacement going? And you work non stop on restoring a car for a year, it gets old.

    And sorry but I will not have suspension that has uncaptive springs, even if I take a handling hit for it.

    Leave a comment:


  • Kruzen
    replied
    Originally posted by James Crivellone
    I have no issues with it and my car handles better then Derek's

    GC is next, but the Cup Kit is far from trash.

    Not much body roll in the garage eh? :p

    Having ridden and driven in stock suspension, cup kit cars, and cars setup like derek's or mine, I definitely think IE3 with bilstein or koni's handles much better than a cup kit setup. my .02

    Leave a comment:


  • James Crivellone
    replied
    Originally posted by backtrail69
    Which isn't a very good choice either since its so soft and low..
    I have no issues with it and my car handles better then Derek's

    GC is next, but the Cup Kit is far from trash.

    Leave a comment:


  • Borat
    replied
    Originally posted by James Crivellone
    How is this normal by any means? I've seen vehicles (e30's included) that if they hit a speedbump, pothole, etc can cause the spring to pop out of the hat really easily.

    The shock should be matched properly to keep the spring under a LITTLE tension when unweighted.

    my
    yup, is illegal down here to have springs that aren't captive. most people solve the problem by shortening shocks.

    Leave a comment:


  • Mystikal
    replied
    Originally posted by DarkWing6
    You would have to have a ton of air for your struts to full uncompress to a point where the springs could come out.
    Not at all. If I cared enough, I'd jack up my subframe to show you how fast GC rear springs lose tension. Completely falling out is another story though.

    Leave a comment:

Working...