Stock sways, poly bushings

[Mike325]

So I was thinking of just getting some polly bushings and keeping my stock sway bars. Would this be a noticeable difference or am I stuck getting a bigger bar?

Thanks.

[e30 gangsta]

Anything is better than 20 year old worn bushings

[g22]

I see bmp sells polly but what size are the stock sways? I was thinking about the same thing. I have an '89 325i...

http://www.bmpdesign.com/category-exec/category_id/56/search_year/1989/search_model/36

[CarsSuck]

my brother did this on his e36 and said it made a difference.

just my

[JRKOUPE]

bushes

Itll make a diff.....especially over old ones ( as said)...they may squeak as well a bit.


but what is your goal?.....get new oe stuff if not a track rat.......mine is a track rat.....and I used rubber.

[jlevie]

Urethane sway bar bushings aren't going to do much over OE bushings in good condition. If the goal is the reduce body roll you need stiffer springs, sways, or both.

[jtb_29]

These should work. Stock front bar is 19mm right? Or is it 20? I forget..

http://store.summitracing.com/partdetail.asp?autofilter=1&part=ENS%2D9%2D5156R&N=700+4294925130+4294839050+4294841743+115&autoview=sku

[BrandC]

These should work. Stock front bar is 19mm right? Or is it 20? I forget..

http://store.summitracing.com/partde...5&autoview=sku

Is that even for BMW's? Just because the ID of the bushing is right does not mean it's universal...

[StereoInstaller1]

The Energy bushings DO NOT FIT the E30 mounts.

I welded a plate under the stock mount location to make the energy mount work, but have not yet installed that subframe.