Spring Help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jdaigner
    Member
    • Sep 2007
    • 98

    #1

    Spring Help

    I bought my car about 2 weeks ago...and it's slammed. The rear camber is ~-3 degrees, which is a bit much for me. So basically I want to raise the car up to alleviate the camber prob b/c I'm too cheap/inept to to the IE rear camber kit and won't do bushings. The springs are red eibachs that say 92771 on the side, they're still on the car so I can't get any info, and the PO hasn't gotten back to me since I bought the car.

    Also, the fronts are GC coilovers, do they adjust w/ the collar nuts or whatever their called to raise and lower the car like on legit coilovers, or do I need to replace the springs on the front as well??

    Overall I'd like to raise the car ~1-1.5". Any help would be appreciated.

    Thanks,
    J
    sigpic
  • jdaigner
    Member
    • Sep 2007
    • 98

    #2
    This is what the PO sent me...will I have to buy new springs for the front to raise it as well??? I know I need rears. What lenght should I buy for the rear to raise it 1.5". If I buy a 7" rear spring, will it raise it 1.5" accordingly, or does the weight come into play etc.
    thanks again,
    Jordan

    They are GC ... Here is the invoise data and rates... Hope it helps. BTW...it is what they recommended when purchased ...
    Invoice #: 32096

    Spring Rates:
    Front: 375# 6" 2 1/2 I.D. Non-binding

    Rear: 475# 5.5" 2 1/2 I.D. Non-binding
    sigpic

    Comment

    • PaintPro21
      Mod Crazy
      • Jul 2007
      • 660

      #3
      PM sent

      ApexRaceParts.com - Facebook - Twitter

      Comment

      Working...