Help! IE's/Bilstien/GC... Max camber < 1 degree?

[bimmer freaks]

So I have IE stage III with Bilstien sports and Ground Control Camber plates....I jacked up the car and pushed the springs towards the engine and max it would go was about 1/2 a degree? The springs hit the inside of the strut housing and it doesn't let me push any further. Has anyone with this setup had the same problem? If so please advise....thank you. I'm not sure if I installed them incorrectly.

[whiltebeitel]

I've got stock upper mounts, Bilsteins, and IE3's. I have ~2.25 degrees all around. Do you have the camber plates installed backwards? I have seen it happen before on other cars. Switch the plates and check the degree readings.