i keep popping the bushing out of the rear shock mount. i got billy sports, but seems like any bump pops out the bushing i had to replace 2 1 on each side... anybody ?...
-
-
are you taking abnout the RSM's?
i was give a NEW pair of aftermarket (made in india) ones.
they just shit the bed after 2 months. pure shit!!!!
look at the JT ones on ebay.
i am running bilstein sports and H & R sport springsseien Sie größer, als Sie erscheinen
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image. -
yea RSM im using oem bmw e46 m3. they keep taking a sheeeet!Comment
-
Replace them with Rogue Engineering 3 Series rear shock mounts. I got ine from Bimmerworld.The car makes it possible, but the driver makes it happen.
Jim Levie, Huntsville, ALComment
-
are u guys running bump stops with the billy sports mine dont just the rod straightinto the RSM...WOW im sold on them RSM set from rougue!Last edited by AlpineBlanco80; 01-09-2009, 08:58 PM.Comment
-
Ireland makes a set of RSM anygood? they make good shit.. i can pick up locally tooComment
-
I've never seen so many grammatical & spelling errors in one page. My head hurts.Comment
-
...and Bilstein rears are NOT internally bumped...:???:Comment
-
TCK anybody...I been hearing good things about TCKComment
-
I've got the Ireland RSM's. I've had them for the better part of 2 years now. No problems.Comment
-
Woops... deletedThe grilles really distract you from the fact that someone took a sledgehammer to the front end.Comment
-
ON e46 rear mounts there is a spacer/washer(at top where stepped edge is below threads) It sits in the shock rod, if this is not installed properly this rubber bushing will pop out when hittin bumps, especially with stiffer shocks, that is your problem, go to realoem.com and pull up a pic of the rear shocks and you'll see itComment
Comment