Need Spacers?

[E30Driv3R]

Hey i was Just wondering what size spacers would i need if i was to get the Kosei K1's off the 325ix? If any. The wheels are 16x7.5

I have a 318iS
thanks

[Jordan]

what offset are the wheels................................

[E30Driv3R]

sorry they are +32mm

[Jordan]

They will fit on your 318iS without spacers, but they will be far inside the wheel wells.

[E30Driv3R]

Should i get spacers or leave them sit inside of rhe wheel well?

[Jordan]

get spacers

[E30Driv3R]

thats what i thought i like the way that the wheels look pushed out to the edge of the wheel wells.

What size and where can i ghet them?

thanks

[Matt86es]

I'm not sure exactly what size...too tired to do calculations, but turnermotorsports has H&R ones...

8mm

http://www.turnermotorsport.com/html/detail.asp?PRODUCT_ID=16234571

15mm

http://www.turnermotorsport.com/html/detail.asp?PRODUCT_ID=30234571

[rwh11385]

ET34 -8mm = ET24
My ET20 16x7.5 wheels were right at the fender, perfect, and ET24 should be good.

I have H&R spacers, same as those, 8mm, 2 pairs, for sale. Turner sells them for $69 each + shipping. I used them for only about a day and they are like new.(just dirtied, I can send pictures) I decided I didn't need spacers as badly as other shit. $130 shipped to let you take them off my hands??

Let me know.

[PanamaE30]

Deeeeaaaammm.. $60+ for spacers? crap.. gonna stick with my friggin factory rims for a looooong time :P

[Matt86es]

Deeeeaaaammm.. $60+ for spacers? crap.. gonna stick with my friggin factory rims for a looooong time :P

I know! That's why I waited until I found the correct offset wheels before upgrading from the caps. My TSW's fill out the wheelwell perfectly, IMO!

[Madhatter]

I have large offset wheels which are 7.5 inch and they locate pretty close to the edge. Im actually happy that there is still room between the guard and the tyre because there wont be an issue of it rubbing when the new springs go in.

this is where mine sit in relation to the guard.

[C ///M]

I have large offset wheels which are 7.5 inch and they locate pretty close to the edge.

Those aren't even close to the edge.

[trent]

I have large offset wheels which are 7.5 inch and they locate pretty close to the edge.

Those aren't even close to the edge.

nobody can be as perfect as you :)

[C ///M]

I have large offset wheels which are 7.5 inch and they locate pretty close to the edge.

Those aren't even close to the edge.

nobody can be as perfect as you :)

Except for maybe you. :idea: