Keskin Kt-1s in 16x7.5 et 20

[jmarch]

My car is moderately lowered with koni yellows and E30 M3 springs. Will these fit w/o rubbing? Do I need hubconcentric rings? What size?

I'm thinking about buying a set of these with black centers. Does anyone have a pic on an e30.

Thanks!
Joe

[daniel]

My car is moderately lowered with koni yellows and E30 M3 springs. Will these fit w/o rubbing? Do I need hubconcentric rings? What size?

I'm thinking about buying a set of these with black centers. Does anyone have a pic on an e30.

Thanks!
Joe

it sounds like they should fit without rubbing unless you try to fit a really wide tire on there, but even then i'd think a 225/45-16 would fit.

as for hubcentric rings, it depends on what the centerbore for the wheel is. e30's have a 57.1mm CB, so if the wheels have a different CB, you will need those rings, which are available for a good price from this one site i cant remember the name of. hopefully someone else will chime in with that. but yeah, check the CB of the wheel.

edit: i've decided you might need to roll your rear fenders.

[Mystikal]

Yeah, even with 225/45/16s they should clear without rolling.

[jmarch]

Thanks - that's good news. I'll probably run 205s as it's hard to find tires as good as the new Dunlop Star Specs in the 225 size. Right now I have ASAs in 16x7 ET25 which require hub rings. Hopefully they're the same size as what I'll need with the Keskins.

[Mystikal]

Ooh, yes the Star Specs will be fun.