The official "What is this wheel?" thread.

[MSGGrunt]

These were on a parts car I picked up. I can't find any info on them. I know they are BBS by the markings on the wheel.

Any idea the model?
Rarity?
Value?

[kronus]

Found these in a local yard and I'm pretty sure I'm going to pick them up even though they are 5x120. I'll just run some adapters. Anyone know what they are called?

OZ Fittipaldi

Custom-faced RS?

RS with step lips

[EfrenFlores]

Are these the AZEV A? On an Alfa Spider. They look good! They might be staggered - hard to tell from this pic.

[ATTACH]117686[/ATTACH]

[ATTACH]117687[/ATTACH]

They definitely are and hell yeah they look great on that car

[LateFan]

Azev?

Are these the AZEV A? On an Alfa Spider. They look good! They might be staggered - hard to tell from this pic.

[EfrenFlores]

Looking to mount Borbet Type S wheels on a H&R lowered 318is. 16x9 et15 w/ 205/45 rubber, 3mm spacers in the front. Will I need to roll any of the fenders to prevent rubbing? Should I go with a different tire size (without looking dumb)?

205/45 of 16x9 is already very undersized rubber with some real stretch and would look goofy.

you will need to roll the fenders.

Also I looked around the internet for 235/40/16 and all I found were these tires

http://www.ebay.co.uk/itm/235-40-R16-Catene-Da-Neve-WEISSENFELS-Tecna-M30-Gr-10-235-40-16-/110972225315?epid=1156746463&hash=item19d675c723:m:mIwTOJZ_nHdYp1e5yqxyhqg

235/40/16 is much better fitment. Too bad they are hard to find
It should be the right amount of meat on the bone especially width wise

[mdlax30]

Looking to mount Borbet Type S wheels on a H&R lowered 318is. 16x9 et15 w/ 205/45 rubber, 3mm spacers in the front. Will I need to roll any of the fenders to prevent rubbing? Should I go with a different tire size (without looking dumb)?

[HerbE30]

Anyone know what these are? They're made by msr and are 15x7.5... anyone know the exact model number?



Thanks!

MSR 228 I believe.

[EfrenFlores]

Borbet C




Ronal LS

Those are actually BBS RZ378

[Metallated]

Anyone know what these are? They're made by msr and are 15x7.5... anyone know the exact model number?



Thanks!

[mbonanni]

Found out they are enkei aspire fins or something. Apparently they're pretty rare. Anyone know if I can get barrels for these 14" faces to make them 15"


Sent from my iPhone using Tapatalk

[mbonanni]

Are these enkei 94's? The spokes look a little different, they come to a triangle at the end rather than a circle like most I see. Does anyone know if there are larger sized barrels for these? Ideally 15x7

Can't get all the pics to load but stamps on the wheels says
14x6
Japan
ENKEI

[c0rbin9]

Ronal LS

No, those look more like BBS RZ378s. Ronal LS would have more flat spokes, there is concavity to these. Also Ronal LS would be polished.

[WarpedRotors]

I have a set of wheels and no idea what they are. They are three piece, but no markings on them at all. 15x7 and 5x120 bolt pattern. Not sure what offset but the centerbore is that of an E36.

[j187sd]

Custom-faced RS?

[RichiesE30]

BMW Wheels??

Found these in a local yard and I'm pretty sure I'm going to pick them up even though they are 5x120. I'll just run some adapters. Anyone know what they are called?