If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
So I picked up a set of wheels, can anyone help me figure out what they are? 16x7, seller claimed they were 3 piece, how can I tell if they are? I have 0 experience with splits haha. There is a solid weld around the barrel of each wheel, is this supposed to be there?
Last edited by LuckyHenriksen; 12-04-2010, 05:35 PM.
Reason: Added better pics/description
Depends on what offset they are. The smallest 5x120 adapter he makes is 20mm. I have 20mm in the front and 25mm in the rear, but my wheels are also ET35.
They are the stock wheels from the car, so I also think they are BBS. They have center caps, but one is slightly bent. But for the price who cares. No tires either.
Now to look into what BBS 2-3 piece wheels they stuck on E38's. Really hope I can run these with some of Robs adapters.
RUN AWAY - those are a death trap waiting to happen - they have been re-drilled & the holes are almost on top of each other. Those are only good for scrap!!!
Nope, that's a common dual pattern arrangement. 4x100 and 4x108.
Previous owner said they're 2 piece, manufacturer starts with a K.
RUN AWAY - those are a death trap waiting to happen - they have been re-drilled & the holes are almost on top of each other. Those are only good for scrap!!!
Leave a comment: