Announcement

Collapse
No announcement yet.

Need help with choosing an offset

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need help with choosing an offset

    So I'm wanting to buy some Axis OG San's, the wheels is 15x8 but I don't know what offset I should run. I've had hondas before this and always ran 30-40 offset...

    Suspension will be Intrax springs (about 2.25 inch drop from what I have read) with Koni Yellows.

    Just want it to be flush, I don't really want to have to roll fenders... no hellaflush stuff lol, I just want a good stance... car will be a daily driver.

    I'll research my options of what they sell real quick for some options. Thanks in advance.

    Edit:
    Found some with 25 Offset
    Last edited by moe30; 06-14-2010, 10:33 PM.

    #2
    for decent looks I would say et20 to et25.
    1985 M10b18. 70maybewhpoffury. Over engineered S50b30 murica BBQ swap in progress.

    Originally posted by DEV0 E30
    You'd chugg this butt. I know you would. Ain't gotta' lie to kick it brostantinople.

    Comment


      #3
      Et 15 with a little fender rolling (bat and a heat gun) should fit great on the rears. I'd stick with an et 20 in the front.

      This is 16x8 et20 front et23 rear with 205/50/16 tires. As you can see there is plenty of room left in the rears. I was able to squeeze 245/45/16s in the back later on.



      Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

      www.gecoils.com
      My euro 316 project Transaction Feedback

      Comment


        #4
        ^ Thats hot

        Comment

        Working...
        X