15" w/out coils

[xwill112x]

lol ak. cut off wheels are to big to cut springs on an e30 with them still installed, use a dremel with a heavy duty re-enforced cutting wheel if you must go that route.

[alwaysclean]

wheel i want to use

[ak-]

Im using a 15mm drop hat.. shouldnt look too goofy tho hu ?

that'll help out. but less shock travel. not good for sports if u live in pothole city.

[xwill112x]

cut 1/2 coil up front and drop hats and you should be flush all around. just pony up and buy h&r race springs.

[ak-]

lol ak. cut off wheels are to big to cut springs on an e30 with them still installed, use a dremel with a heavy duty re-enforced cutting wheel if you must go that route.

NOTHING, is impossible.

[ak-]

cut 1/2 coil up front and drop hats and you should be flush all around. just pony up and buy coils.

[Stephen]

Cut half a coil
cut the bumpstops
???
Profit.

[xwill112x]

Cut half a coil
cut the bumpstops
???
Profit.

your running coils correct?

[ak-]

Cut half a coil
cut the bumpstops
???
Profit.

He'll still bang the last few bumps he'll have left with h&r sports.

[Stephen]

your running coils correct?

Yes, which ultimately is what i would do over anything listed above. With shortened bumps/ regualr billys, theyre really not expensive and can get you low.

[alwaysclean]

Im over coilover systems.. unless I pay top dollar Im not going to happy w/the ride quality.. Bilstein and h&r are known for qquailty .. Im just going to but the wheels put them on then start playing with the suspension..thx for the imput.

[ak-]

Im over coilover systems.. unless I pay top dollar Im not going to happy w/the ride quality.. Bilstein and h&r are known for qquailty .. Im just going to but the wheels put them on then start playing with the suspension..thx for the imput.

cut 1/2 coil up front and drop hats and you should be flush all around. just pony up and buy coils.

go go go

[F34R]

I am tucking 14/50/195 but running GC. GO COILS!!!!!

Ground-control.com and bilstein sports. It is one AWESOME setup. I love how it rides and handles. I did it for under 900 for everything.

I also fab & weld the front perches in for non-welders. LA is too far away for ship though.

[F34R]

wheel i want to use

Cool looking wheels.

[xwill112x]

Yes, which ultimately is what i would do over anything listed above. With shortened bumps/ regualr billys, theyre really not expensive and can get you low.

pmed