Style 19 redrill to 4x100...possible?

[RAYREY]

how you decide what you are going to do with the set i have a e39 if the price is right i'll take it off your hands...

[dreamchasin]

Both of you have been PM'd.

[mkcman17]

any conclusion on the redrill? can't be done?

[Hartge_H27]

call rotiform they might be able to do it

http://www.rotiform.com/

[M-technik-3]

This wheel? They have been run but on a 5 lug narrow chassis. I like them as well.

[dreamchasin]

Yes that wheel, they are being shipped back to me. I will let you know thursday or friday of this week when i get them. I will take a picture for you as well.

call rotiform they might be able to do it

http://www.rotiform.com/

I will never go through rotiform, they are a copy cat wheel distributor that will not man up and admit it. They stole the lamborghini's wheel design to every pin point detail.

YES i did run 002's however they are not an exact replica of the wheel they were copied from to every detail like rotiform did.

[mkcman17]

i was referring to redrilling a 17x8 style 5 in reference to the center hub

[dreamchasin]

i was referring to redrilling a 17x8 style 5 in reference to the center hub

style 19s (what i got redrilled) and style 5's have the same hub bore.

they are both 17x8

[StereoInstaller1]

No depth for adapters?

[mkcman17]

but the 17x8 and 16x8 style 5s have different hubs

[dreamchasin]

but the 17x8 and 16x8 style 5s have different hubs

Never heard of the 2 piece 16x8 style 5.

No depth for adapters?

Will let you know when i get the wheels.

[mkcman17]

Never heard of the 2 piece 16x8 style 5.

the 16x8 are 1 piece, and they are pretty common to redrill, i've just heard that the 2-piece 17" style5s have a bigger center bore and to redrill would open it up.

and they're et20 so the adapters would pretty much mexipoke them, right?

[Rodoni]

the 16x8 are 1 piece, and they are pretty common to redrill, i've just heard that the 2-piece 17" style5s have a bigger center bore and to redrill would open it up.

and they're et20 so the adapters would pretty much mexipoke them, right?

Yes the 17x8 style 5s have e39 hub bore. IIRC its 74.1ish. Youll def need hubcentric rings. THey are et20

The e38 style 5s are 72.6 or .1 (e36 HB). They are et 23 IIRC.

[mkcman17]

Yes the 17x8 style 5s have e39 hub bore. IIRC its 74.1ish. Youll def need hubcentric rings. THey are et20

The e38 style 5s are 72.6 or .1 (e36 HB). They are et 23 IIRC.

yup those numbers are right afaik. but the guys that redrill the 72.56 are almost breaking through to the center, and on a 74.1...well..

[dreamchasin]

yup those numbers are right afaik. but the guys that redrill the 72.56 are almost breaking through to the center, and on a 74.1...well..

Yes it is breaking through the center a little bit. It doesn't make them any weaker.