How much (-offset) before it looks stupid??? please help...Ahh

[MonkeyMadness]

How much (-offset) before it looks stupid???

looking to run 16x7 et-9mm Will this work??
cars got a 1.5"-2" drop
also looking for a good tire size to fit..

Need info bad rollers I'm on got two bald tires and one flat this morning.
I have an ok from my boss (wife) to finally mount my rims...

need good info
thanks....

[E30SPDFRK]

It will look roughly like any 16x8 et0 wheel looks. Ex. sportmax. Probably would be able to fit a 205 max.

[Philo]

Yep. Basically 3-4mm more inward than a sportmaxx 002, or any 16x8 et0 wheel and ~1mm inward compared to a 16x9 et15 wheel.

[george graves]

How much (-offset) before it looks stupid???

I don't think you can define it with a number, but..."I know it when I see it."

[MonkeyMadness]

Cool thank guys... so i should be ok i didn't want anything too wild.. i may need to roll my fenders possably pull alittle bit. i'll also be running 205/50 i also have the option to run 205/45 for the same price

[Philo]

205/45 for sure. You'll end up rubbing like crazy on the 50 series. Plus the 205 isn't going to stretch at all on a 7" wheel, so you'll most likely be rolling the fenders pretty good.

[nrubenstein]

You are already well past stupid with that setup.

[Ryann]

Mucho poke+narrow rubber=goofy, imo.

[Eric]

How much (-offset) before it looks stupid???

Offset reduction is directly proportional to the amount of low.

[MonkeyMadness]

idk.. looks like I should be ok..

http://www.willtheyfit.com/index.php?width=195&aspect=65&diameter=14&wheelwidth=6.5&offset=25&width2=205&aspect2=50&diameter2=16&wheelwidth2=7&offset2=-9&Submit=Submit

plus I already dropped the coin on the treads.. :giggle:

[8380 Labs]

I don't think you can define it with a number

maybe you can't.

[StereoInstaller1]

Well, judging by the crappy pics of those they are well past "eur-oh" (thoo thuuuper!) and into "I can't afford wide enough tires, so I am gonna lower my shitbox more".

[straight6pwr]

idk.. looks like I should be ok..

http://www.willtheyfit.com/index.php?width=195&aspect=65&diameter=14&wheelwidth=6.5&offset=25&width2=205&aspect2=50&diameter2=16&wheelwidth2=7&offset2=-9&Submit=Submit

MSpaint diagram is about right for this type of wheel fitment.

[MonkeyMadness]

Well, judging by the crappy pics of those they are well past "eur-oh" (thoo thuuuper!) and into "I can't afford wide enough tires, so I am gonna lower my shitbox more".

Oh man that's just harsh.. i'll post pic of them mounted as soon as my fenders are rolled (sunday) to back up your qoute... :up:

MSpaint diagram is about right for this type of wheel fitment.

I hope soo, it's all I had for/as a reference to how it should fit..

[2002maniac]

Is this what you're going for?