new ESM's i need elp

[korea619]

so i got esm 002
16x 7.5 et 20

for fronts and i seen the website
im getting 16x9 in the rear but the come in et20 and et10 i reallly want that staggered look so wgich willl actually look deeper the wheel already says it going to have a 3 inch lip but idk if offset will affect it
your help would be great

[bmw325csi]

Et10 is made for the front so you would need rolling/pulling of the fenders. Mine is et20 in the rear and the fitment is perfect. Check sig.

[Gadea]

I´m not sure what do you need elp with. I´m guessing you may need to roll your rear fenders if going that route.

[bmw325csi]

et20 all around but front have a 15mm spacer

[korea619]

ok cool that all i needed i wasnt really sure how that worked so et 20 all around

plus i do plan on getting fender flares so i should be good

thanks guys

[Ant_e30]

^ why get et20 all round when you know you need to run a spacer? i prefer wheels that fit straight up without a spacer... i'd say go ET10 all round. or, do ET10 front with some camber (via the use of camber plates) and get them to tuck in a bit more, and run ET10 rear and let them sit more straight up, which they will as camber doesnt go as crazy up back