Konig Retrack

[MitchD1283]

I'm wondering if anyone is running these wheels on their car. Looking for a set of 15x7.5 and I can get them for $80 each. The offset is 32. Not sure if I will be needing spacers or not. They will be track/fun summer wheels.

If these won't fit I'll probably go with the Rewinds since their only $70 a wheel.

Thanks for any info everyone!

pics for clicks:

[gverelli]

These look pretty good, any idea of weight???

[MitchD1283]

14.6 lbs for the 15x7.5. I'm worried about the backspacing. They are et32. Might need some spacers

[M-technik-3]

Copy of the old Aluett's circa 88 is

[gverelli]

14.6 lbs for the 15x7.5. I'm worried about the backspacing. They are et32. Might need some spacers

14.5lbs is pretty good, I guess with 13mm spacer you will be at et19 which will work. If these were around et20-25 they would be perfect. I wonder if anyone actually has these.

[MitchD1283]

14.5lbs is pretty good, I guess with 13mm spacer you will be at et19 which will work. If these were around et20-25 they would be perfect. I wonder if anyone actually has these.

I'm wondering that too. I googled it and didn't find anything. I think I would run like a 10mm spacer at the most since they will see track time. I don't want to put too much of a side load on the bearings.

[gverelli]

I'm wondering that too. I googled it and didn't find anything. I think I would run like a 10mm spacer at the most since they will see track time. I don't want to put too much of a side load on the bearings.

With our hub in the rear the minimum spacer needed is 13mm so that you can have have the extended lip for the wheel to sit on.

[chop_suey]

ya those look good, ive looked those few times and had the same questions. someone should buy them and post pics and whatnot

[MitchD1283]

^ lol!