16x7 -0 offset with a 205/50 Tyre?

[MonkeyMadness]

WIll this work at all...?

I have the rims and tire's already
I rolled my wheel wells but haven't pulled them...
Can I get away with this setup or do i need to have them pulled too?


thx

[UDelaware30]

mount 'em up and find out...

[MonkeyMadness]

mount 'em up and find out...

If only i could...ugh They're 5lug and i'm still 4lug, i ordered adaptec adaptors from 8380 fab a week ago. I would like to get the needed info before mounting. if someone is running a simular setup with out issue, or if i do have to pull the fenders i can do it now before i chew up new rubber...

[Wh33lhop]

205/50 is pushing it--it may work depending on your ride height. I'm assuming they will be ET0 AFTER the adapters.

[E30SPDFRK]

As long as that offset is after adaptors it'll work fine.

[MonkeyMadness]

Yes et0 after the adaptor on the front.. and -5 on the rear.. and yes i gotz sum low.. :down: :-D

[Philo]

What suspension are you on?

[MonkeyMadness]

stock with Eibach cup 1.5 and drophats, stock strut inserts in front, and bilys out back.

[Wh33lhop]

I would get some stiffer suspension if I were you. Eibachs with stock struts is not going to be very resistant to compression and you will probably get a lot of rubbing.

[einstein57]

NITTO NEO GENS are wider then alot of other tires

16x7 et 20 maxxim remembers. So first thing i had to do was grind down some spare bolts i had laying around so they would be flush with the spacer. if your car has eccentric trailing arm bolts and you are running the correct alignment these are way to thick. If your car is dropped and has the normal xtreme camber our car exhibit then these are perfect.







proper camber side






non corrected camber side

[MonkeyMadness]

IDK about you, But I was always taught to hide the bodys in the trash can not next to it...

Your doing it wrong..

[Ant_e30]

^ lol good call.
BTW whenever i'm fitting rims and things are tight so to speak, i jack my car up and whack it on stands, then jack the wheel up independantly with my jack and watch it move up and down. You can obviously also turn your wheels and do the same thing. This then shows you the complete travel and shows you if/where you hit

[Philo]

/\ At first I thought it was a spam post, then soon realized it was just a very poor use of the english language.

Also, You're going to have trouble fitting that tire size.

[Pussy30]

I ran 15x8 and 15x7 0offset with 205 50 and 195 50 fit and lookes awesome but rolling rear fenders is a must

[MonkeyMadness]

Ya i rolled the fenders but worried I will have to go back and pullem