Announcement

Collapse
No announcement yet.

Help with MIM 1900's

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help with MIM 1900's

    Hi guys i recently bought a set of MIM 1900's. 2 of them ET13 2 of them ET25. At least that is what i tought. Today i noticed i only have one rim ET13. But i can't see any differince with the other rims. I can't see that this rim is 12mm 'wider' than the other. I have them mounted on my car so i should see that differance. As i said all rims look very similar. The ET13 does have more information on the back of the spokes like it's built year (88) and stuff. The other have blanc spokes and only information on the outside of the wheel. See pictures.











    Close ups from 1 rim.

    This is the ET13





    Slight difference at the back of the spokes.



    I begin to think that my other 3 rims are maybe replica's because of the lack of information like my ET13 rim has. All 4 wheels also differ slightly from other MIM rims, they dont have that 'line' at the end of the spokes. Like on this one



    Overview:





    Left is ET13

    #2
    I have seen them with and without the line so I wouldn't worry about that too much. I've owned a couple sets myself.

    Not sure on the offset dilemma though! The ones I had were all ET13. I would say don't worry about it!
    BimmerHeads
    Classic BMW Specialists
    Santa Clarita, CA

    www.BimmerHeads.com

    Comment


      #3
      if you find that the car handles weird it might be an acceptable solution to run 12mm spacers on the 3 et 25 wheels

      Comment

      Working...
      X