Azev wheels

[mtlbloodshot]

I recently purchased Azev Type As for my 318is.. They're 16x7.5 ET 20 and rear is 16x9 ET 15. Im just wondering if anyone has tire sizes or ideas that would fit.

[DTM190]

Go through this thread and you will find some options

http://www.r3vlimited.com/board/showthread.php?p=2703582#post2703582

[MR 325]

If I were to run them they would get 205/50 front and 225/45 rear.

Most people like to run little undersized tires on them though... :(

[325ix]

I think it is hard to fit much on a 9in wide tire under stock fenders.

[mtlbloodshot]

People are telling me to go 205/40 in the front and rear.

[MR 325]

People are telling me to go 205/40 in the front and rear.

I wouldn't, but it's personal preference. A 205/40 is 2 sizes smaller in height than what an OEM diameter would be.

[mtlbloodshot]

I wanna stretch

[constructor]

I wanna stretch

Yes, but 205/40 would have too short a side wall even if you slam the car. 205/45 would be the shortest I would go.

205/50 and 225/45 as MR 325 suggests would be my preference. 225 will have stretch on a 9" wheel

[Jb325is]

If the wheels are staggered putting the same size tire front and rear will look terrible. I have a square set of 16x9's and I run 225/45 all around with rolled fenders.. I'm planning on running 225/40's next

[mtlbloodshot]

If the wheels are staggered putting the same size tire front and rear will look terrible. I have a square set of 16x9's and I run 225/45 all around with rolled fenders.. I'm planning on running 225/40's next

Why are you planning on changing to 225/40 cause you rub or ??? People tell me, put 205 all around, others says 215 in the rear and 205 in the front. Its very hard to make a choice.