SSR Type F Euro FYI

[Massimo]

Finnaly a good looking japanese wheel that fits our car in a good size. It is the SSR Type F Euro 17x9 4x100 et25 just don't know what the centre bore is. Non the less if I had the money I would have these on the car right now with some rolling of the guards of course.

http://www.ssr-wheels.com/wheels/typefeuro_16171819.asp

[Teaguer]

Rice.

[Massimo]

I like japanese wheels they just usually don't fit E30's I think it would look the shit.

[Teaguer]

More like the shits.

Even though it may have an available et25 offset the wheels are still high offset design. Aka rice.

[DuMa]

thin spokes with no lip and high diameter sized wheels except for alpina doesnt usually look good on E30s

[pandaboo911]

they only have the 16s in 16x7
/facepalm

[IminDiegoTriick]

Im not quite sure how the multispokes makes for a 'european' brand.

[Massimo]

Well your all gay.


I am not really into the deep dish for racing wheels. I love dish don't get me wrong but for cruzin not racing (yes I know they good for racing). I like these because the have a deep centre with shallow spokes that way you can fit what ever brake setup you like.

[Mr Two]

The 17x9 et25 ones are the deep face (concave I'm assuming) design, and they are 16.4 pounds.

That's awesome.

[Jand3rson]

You're high as shit, Teaguer. Those are badass looking.

[kameleon]

I like them, nfi where the rice comment is coming from we havent even seen them on a car yet!

[Ant_e30]

There are loads of multi piece Japanese rims that fit e30..

[Massimo]

yeh but not single piece wheels. The problem is that if you are into racing we are limited to something around 15x8 anything and about 16 pound eg TR 15x8 about $400. If you want something bigger that dose not weight as much as a truck or cost you and arm you need to go custom 3pc like kodiak racing which are ok but not as light as a single piece fordged item.

That is why this wheel is good it is big enough that the guys with big hp can run big disk brake's, they are wide so bigger tires more traction, of a concave design so you are not limited to brake caliper design, and they are light and they are at a reasonable price for such a wheel $2000. Companies like BBS, OZ-racing and HRE charge like $5000 for a similar wheels. Then the bonus is that they look good.
That is why I posted this.

[Teaguer]

yeh but not single piece wheels. The problem is that if you are into racing we are limited to something around 15x8 anything and about 16 pound eg TR 15x8 about $400. If you want something bigger that dose not weight as much as a truck or cost you and arm you need to go custom 3pc like kodiak racing which are ok but not as light as a single piece fordged item.

That is why this wheel is good it is big enough that the guys with big hp can run big disk brake's, they are wide so bigger tires more traction, of a concave design so you are not limited to brake caliper design, and they are light and they are at a reasonable price for such a wheel $2000. Companies like BBS, OZ-racing and HRE charge like $5000 for a similar wheels. Then the bonus is that they look good.
That is why I posted this.

Not really trying to sound harsh but you really should stop trying to explain something you obviously know nothing about.
Its ok to admit you like rice wheels on your car.

[Massimo]

Well it is true it is hard to find wheel like that at a reasonable price, please if you know of some give me some links so I can add them to my favorites.

Oh and I am not saying that I do not like japanese wheels rice and japanese are two different things. I though there was a thread that covered this.