15mm spacer on 9J wheel - ET0 and problems?

[rav320uk]

That "might" be the problem, they look thicker than the Gaz ones.

[Jozi]

Probably. Sometime I think I should have just gone for lower drop hats and shortened shocks up front...

[rav320uk]

I'm going KW with drop hats.

[Jozi]

I figured I'm going all out I might as well do coils...

I still have the touring Eibach springs though, I'll need to get another one just so I can use them :P

[rav320uk]

I looked at either the Gaz or the BC coilovers, but decided against them, and for the cost of those, I can have the KW's and Billie B8's and Eibachs, so the best of both worlds really.

[Jozi]

B8's and eibachs come close to coilovers though and no adjustability with them, I'm hopping I can achieve a nice ride height and damping similar to b8's with this. If I sell the springs I can make a few quid back but I doubt that will happen anytime soon.

[rav320uk]

You could also look at getting some custom made Faulkner springs, normally about £35 each

http://www.dfaulknersprings.com/specials.htm

[Jozi]

Denis suggested them as well. I'll see what I'm like once she's dropped on all 4 wheels again, I'll get some bags of coal or cement to simulate the weight of the m52 :P

[rav320uk]

That's a lot of bags, about 11 all in i think

[Jozi]

I might rethink that one...

170kgish for a m52?

[rav320uk]

Not too sure, ask on the Zone.?

[Jozi]

Maybe some other day :D

I have the front panel removable and absolutely no intention to carefully lift the engine out of the blue touring...