Anyone here w/4x108?

[genbar]

First of all, Happy Thanksgiving!

I have a 1991 318i and my wheel pattern is 4x108. I cannot seem to find it documented anywhere for the e30. Does anyone else have this lug pattern? I find it weird as hell, and frustrating as all hell because it's harder to find wheels for this damn thing.

[ak-]

wuttttt

[Raxe]

Troll?

[genbar]

No, I'm serious as hell... I just got into E30s.

[nrubenstein]

First of all, Happy Thanksgiving!

I have a 1991 318i and my wheel pattern is 4x108. I cannot seem to find it documented anywhere for the e30. Does anyone else have this lug pattern? I find it weird as hell, and frustrating as all hell because it's harder to find wheels for this damn thing.

I'm going to assume that this isn't a troll. In that case, I will simply state that you do not have 4x108 wheels. They are 4x100.

So, why do you think that you have 4x108? If it's because you've got some piece of shit aftermarket wheels that have 4x108 written on them, ignore it. If it's because you took a measurement, it means that you did it wrong.

[genbar]

Well I'm basically new to cars in general... so take it easy on me. But I saw "4.108 and et30". Haven't measured for myself yet.

[nrubenstein]

Well I'm basically new to cars in general... so take it easy on me. But I saw "4.108 and et30". Haven't measured for myself yet.

Ignore it. You have 4x100. Period. End of story. The only way that you have 4x108 is if somebody custom machined the hubs (no way in hell), or fitted 4x108 wheels using adapters.

Edit: And for what it's worth, I have seen a LOT of wheels that have the wrong measurements cast into them. It can be puzzling.

[genbar]

Ignore it. You have 4x100. Period. End of story. The only way that you have 4x108 is if somebody custom machined the hubs (no way in hell), or fitted 4x108 wheels using adapters.

Well I forgot to include this vital bit- they're 14'' BBS weaves, which is why I'm kind of confused.

*Just read your edit... well that is damn inconvenient!

[Jand3rson]

If I had 4x108 hubs, I'd be running these wheels:

[FunfGan]

I'd run some old school Ferrari wheels.

[Ryann]

If I was 4x108 I'd be running these. So sick.

[e30lov]

the boyds in my sig were originally 4x108

great thread

[AndrewBird]

Would it be possible to run 4x108 wheels with the stock 4x100 hubs and wobble bolts? Or is that too much off for even wobble bolts to work?

[CabbE30]

Would it be possible to run 4x108 wheels with the stock 4x100 hubs and wobble bolts? Or is that too much off for even wobble bolts to work?

Wobble bolts only work within like 2.5mm iirc

[Sputnik]

You read my mind!

If I had 4x108 hubs, I'd be running these wheels: