XXR, CCW knockoffs

[mcskibadee1]

I used my stock bolts with a thin walled 17mm socket. I think its 17mm but it worked fine. Any tire shop should be able to do it no problem.

[mbonanni]

Do all xxr wheels require wheel studs or tuner lugs?

[Ayman]

I'd find out the size of the stickers/centers of the xxr logo and search for bmw stickers that size on ebay

[mcskibadee1]

Does anyone know where I can get some BMW center cap stickers for my XXR 521s?
Kind of like this guy made.

[mcskibadee1]

Figured this should go here just for reference.

I purchased the XXR 521 16'' et20 rims and mounted them to 225/45/16 falken tires.

There are no spacers but you will need hubcentric rings and the wells are not rolled to the best of my knowledge. I have about an index fingers space and will be getting that little lip in the rear rolled just for peace of mind.
Here it is before (ride height reference)


And here it is now. ( shitty cell pic)




I think I will be lowering the front a tad and I should be good. I am so happy these fit because my car isnt slammed so rubber bands would have looked so damn goofy.

[jdirty]

Someone post up a pic of the 16x9s +0 fitted. Would love to see these

I would but nlmotoring doesn't have any in stock. Lol

[CW325]

16x8 et20 no spacers needed


DSC0393812 by ClaytonWarrin, on Flickr


DSC03951 by ClaytonWarrin, on Flickr

[Ricky_J]

someone post up a pic of the 16x9s +0 fitted. Would love to see these

^+1

[mrcheezle19]

might grab a set of these in 17's. Anybody want some Rota Formels?

[L8 apexr]

Thanks! Do you happen to have any other pics?

No more pics,promised myself I wouldn't take any more untill its been repainted and shiny.Working hard to get it ready,race car taking up all my time at the moment to get ready for the 1st event this weekend.

[CW325]

I went with a hubcentric 5 mm,works perfect.3mm would work too.

Thanks! Do you happen to have any other pics?

[L8 apexr]

I went with a hubcentric 5 mm,works perfect.3mm would work too.

[CW325]

Had mine mounted up with 225-45-16 direzza II's last week,still winter up here so it'll be a bit before I can test them out.These do need a small spacer up front as the back of the spokes just touches the caliper bracket and you can't get much of a feeler gauge between the lip and the stut.

What size spacer? 5mm? or would maybe even a 3mm work?

[L8 apexr]

^ Looks good Tom

Thanks Jay,just about have all the needed parts for the car to make its way to your shop for some lovin'.

Be seeing you guys soon.

[IRUNEDM]

Someone post up a pic of the 16x9s +0 fitted. Would love to see these

I test fitted 16x9 -5 on the rear of my car. See link under my signature and go to page 7.