Anyone running XXR 527?
Collapse
X
-
I had to roll/pull the fronts, and roll/pull and cut the inner fender liner back about 5" to clear the rears and they still rub under full suspension compression. I'm also running an undersized tire at 245/35/16 in the rear. Suspension is J-Stock. -
So i have to roll/pull the fenders even without spacers to run these et 0 wheels?
I am debating doing a wider rear fender to fit them with 25mm spacers.. My drivers rear arch is rusted and have to redue it anyways, so why not try something new?Leave a comment:
-


best I've got. No way you will run these with spaces. et0, took tons of fender work to fit.Leave a comment:
-
I'm looking for some rear pics of these to see how wide a 8.25 tire looks on an e30.
Also, I'm planning on getting these and have 25mm spacers.. Would these fit with the spacers and moderately stretched tires with just rolled fenders? It is just on an eibach pro kit no camber platesLeave a comment:
-
here are mine, 16x8.25 et0 on an early model
The fronts need to come down more but i keep ripping my exhaust off so i have to fix that first
Leave a comment:
-
Couple from a test fit today.




Still rubbing a tiny bit in the rear, going to pull them a bit more and try again Saturday.Leave a comment:
-
I didn't really care for these wheels until now. They look really good on both the green and black cars.Leave a comment:
-
-
Forgot about this thread. Here is a mock up with the jack in place:



Needs a little fender pulling, but it will fit. Should be done this weekend.
Here is the car on the J Stock suspension with the 225/50/16 Star Specs:



I'll post up some more when I get the fenders pulled more.Leave a comment:
-






Leave a comment: