My e38 style 5 drill/fill progress -wheels painted /measurement/info

[dinanm3atl]

Damn. I really want to run the E38 Style 5. Looks good. Real good.

[keefy6]

that looks cleann

but i would not have machined off the tabs for the covers just in case you decide you wanna run them.

what does the back look like?

back is machined flat like the center, also i don't want to run center caps.

[LJ851]

get some tires on those wheels, they look great.

[keefy6]

center measurement is 13.4 mm thick

MemoryFab

http://www.memoryfab.com/

(direct copy from site)

"Custom Wheel Service We can enlarge, rebarrel and rebuild most wheels to most diameter, width, and offset. This includes turning wheels to two-three piece, redrill, powdercoat, paint, pin-stripe, machine, polish lips to new condition for any wheel. We can also drill PCD holes, and bore hubs for wheels to match your car. You can send your rim halves and bolts to be assembled during the rebuild with no additional cost on top of our regular labor charge."

[LJ851]

center measurement is 13.4 mm thick

MemoryFab

http://www.memoryfab.com/

(direct copy from site)

"Custom Wheel Service We can enlarge, rebarrel and rebuild most wheels to most diameter, width, and offset. This includes turning wheels to two-three piece, redrill, powdercoat, paint, pin-stripe, machine, polish lips to new condition for any wheel. We can also drill PCD holes, and bore hubs for wheels to match your car. You can send your rim halves and bolts to be assembled during the rebuild with no additional cost on top of our regular labor charge."

Well, it's good to know my eyecrometer is still working, that is a lot of metal removed! My wheel is 26.25mm thick at the thinnest spot.

Is this who did the work on your wheels? How much did it end costing you if you don't mind telling?

[keefy6]

L581, you have e38 style 5 as well?

[kalib0y]

Best fill and drill Ive seen so far. Let me know if you need some studs for those bad boys :)

[LJ851]

LJ851, you have e38 style 5 as well?

I believe so. How can i tell for sure?

[keefy6]

I believe so. How can i tell for sure?

quick search will get you the info got mine off ebay

[keefy6]

Best fill and drill Ive seen so far. Let me know if you need some studs for those bad boys :)

hey thanks ill let you know, and they turned out exactly how i wanted:)

[csermonet47]

Wow those look great!

[Jand3rson]

Best fill-and-drill EVER, those look incredible! They remind me of Enkei 92's with the flat-face:

[thebutcher37]

Mounted pics!!!

Backside pics aswell!

[Vicarious]

That must be a cheap cell phone pic - cause that wheel looks REALLY out of round. ;)

i thought so too at first. but its just an optical illusion because of the slightr shadow in the inner left, making it seem off-center

[straight6pwr]

*golf clap*