Schmidt TH lines direct fitment?

[quillbro]

Im looking to get back into the e30 scene and was wondering, is there any size schmidt TH line wheel that is a direct/ish fitment to the e30?

I can roll fenders but Id rather not pull fenders. I have a buddy running wobble bolts on a mkV GTI with RS and no problems so I would even consider that.
and spacers are a non issue as well as long as I know what I need.

Just curious... im not sure of all the Schmidt TH sizes out there, any help would be appreciated.

[noE30]

Alot of people run them on 4 lug vws so they should fit e30s as well. Hard to say with out knowing wheel specs.

[Ant_e30]

i believe they're 4x100 so all good

[quillbro]

does anyone know the PCD of the 4x100 mkII GTI fitment wheels? Im guessing I would need spacers, doubt they are the same as an e30... just curious

[Ant_e30]

PCD stands for Pitch Circle Diameter, that is the "100" part of 4 x 100. (obviously the 4 is 4 stud/hole).

I'm guessing you mean offset? from what i can see on the site, they come in 2 piece or 3 peice. offsets and widths vary quite a bit. there is a picture of a mk3 GTi with some pretty good fitment and specs which would work on an E30. But it all depends on the look you want and so on.

search around this site a bit (its a bit confusing and tends to switch around between German and English but it should give you a bit of a hand. when they say 'tlg' it means piece e.g. 3tlg = 3 peice, 2tlg = 2 peice)

http://www.german-wheels.com/produkte/database/?wid=5&sdi=true