Perfect Metal Finishing: Wheel Refinishing Reviews Needed

[ACHTUNG]

I'm looking for a high quality shop to fill and drill then refinish some rare wheels that I just picked up.

Levent recommended Perfect Metal Finishing in NJ. I completely trust Levent's recommendation but I wanted to know if any of you have had first hand experience with Perfect Metal Finishing? How was their quality? Any issues? Easy to work with?

Thanks

[einstein57]

Budget? Aluminum? Pics front and back?

[325ix]

I believe ca tuned has some wheels from them.

[ACHTUNG]

Budget? Aluminum? Pics front and back?

Budget is not too much of a concern. I'd like them refinished to the highest quality possible. They are aluminum centers.

Pics of front and back:





What I would like done is to weld in a new concentric center ring to get the center bore down to 54.1mm. Then fill all 5 lug holes so they are flush with the center piece and fill all 5 indents on the rear face between the holes flush as well so there's as much meat to the center face as possible. Then grind the added material flat and re-drill to 4x100.

Powder coat the centers maybe Hypersilver or similar to it then have the 2.5" outer lips refinished and polished up. I may add larger outer lips (3.5") down the road to make these 8.5" width wheels.

So far it looks like Perfect Metal Finishing in NJ has the capabilities and experience but I'm looking for people that have first hand experience with them to give their input regarding their quality and reputation.

Their facebook page shows some pretty sick wheels that they refinished and shows a picture of their filling and drilling technique. Looks like good work to me but I want to make sure before shipping the wheels to them.

http://www.facebook.com/PerfectMetalFinishing

[DTMbimmer07]

I'd contact Rotiform if i were you. i called them a few weeks ago and they charge $100 per wheel to fill and redrill, painting is top notch, if you look at some of there pictures the have on there websites, alot of people send there wheels out to them because they can pretty much do what ever color you want.

[325ix]

Renewed finishes. Ca tuned has experience with them. Read the thread.

http://www.r3vlimited.com/board/showthread.php?t=240557

[grippymonkey]

Like it was already said...

Go with Rotiform. They deal with high-end wheels all day everyday. They refinish some awesome old school wheels. They can custom make anything. They can make barrels for your wheels, change lug patterns, and fix anything.

I would hit them up.

[ACHTUNG]

I'll give Rotiform a call. The only issue I have is that they're in CA and I'm in NH.

[ZM Blue Devil]

I'm looking for a high quality shop to fill and drill then refinish some rare wheels that I just picked up.

Levent recommended Perfect Metal Finishing in NJ. I completely trust Levent's recommendation but I wanted to know if any of you have had first hand experience with Perfect Metal Finishing? How was their quality? Any issues? Easy to work with?

Thanks

Just to clarify, when you pm'd me and asked for a fill and drill company I suggested them as I see a locals using them. We at Guten have never used them(I thought I had noted that, perhaps I didnt). I dont know of anyone else that does fill and drill.

[ACHTUNG]

Just to clarify, when you pm'd me and asked for a fill and drill company I suggested them as I see a locals using them. We at Guten have never used them(I thought I had noted that, perhaps I didnt). I dont know of anyone else that does fill and drill.

Yes, I did note that you had never used them. Have you seen their work first hand though? If so, how does their quality look? Not just the filling and drilling but their complete refinishing work?

[DTMbimmer07]

You can take the wheels apart and just send them your faces so u don't get raped in shipping

[ACHTUNG]

You can take the wheels apart and just send them your faces so u don't get raped in shipping

But I need the whole wheel refinished. All 4 of them.

[einstein57]

Here is a set i just did recently. I did not paint the centers or have a chance to clean up the centers though. This was a rush job for the stance works invitational that i completed in a week. In the So Cal wheel world thats impossible.

Soda Strip the centers $60
Polish lips $140
Fill and drill with milling $350
Chroming bolts $80-100
Polish caps $35
Finishing centers $200









I also did these cars

[DTMbimmer07]

Here is a set i just did recently. I did not paint the centers or have a chance to clean up the centers though. This was a rush job for the stance works invitational that i completed in a week. In the So Cal wheel world thats impossible.

Soda Strip the centers $60
Polish lips $140
Fill and drill with milling $350
Chroming bolts $80-100
Polish caps $35
Finishing centers $200

So did you do this or did you have another company do this? fill and redrill part i mean.

[iceman44]

this is perfect metal work 600.00 polished painted and gold rivet

Sent from my SM-G900V using Tapatalk