Sizing concerns and questions

[bimmerboy709]

So I just picked up a set sparco 16x7 et40 ns2s and I have a few questions..

Now I understand that the stock bottle caps are et35, so how much of a difference is it going to make?

Will I be rubbing on my shock or fender? Will I need longer lug studs?


All precautionary questions of a n00b.

Thanks in advance for your help.

[325ix]

You will need spacers, no doubt about it. About 20mm.

[MR 325]

15mm would be the minimum spacer to make it look decent. They will NOT fit without a spacer.

I'd recommend talking to Ryan at Motorsport Hardware. You'll want a stud kit too.