Fitment "Q" for the wheel pro's........ BBS RS's

[steve68]

Wheels to fit a 90 325IS, the wheels are BBS RS 025 16x9 with a et36, is there a adapters made to fit this, from the 5x120 to a 4x100, with the et36,

I know I could fill and drill but if I can get adapters I can use them on the M3 also,

any help is greatly appreciated, I did post this in the BBS section, but got no hits,

Thanks again,

[Farbin Kaiber]

There also is a specific wheel fitment thread.

http://www.r3vlimited.com/board/showthread.php?t=285788

It's actually stickied on the top of this subforum. Mystikal may not respond right away, but you'll get an educated response within 72 hours tops.

[steve68]

thanks posted it there also,

[8380 Labs]

Wheels to fit a 90 325IS, the wheels are BBS RS 025 16x9 with a et36, is there a adapters made to fit this, from the 5x120 to a 4x100, with the et36,

I know I could fill and drill but if I can get adapters I can use them on the M3 also,

any help is greatly appreciated, I did post this in the BBS section, but got no hits,

Thanks again,

we've got 4x100 > 5x120 adapters for sale - check our thread in the retail classifieds. you can email us at info@8380labs.com with questions or to order.

[steve68]

Thanks!!!

Looked yesterday online and didn't see much thanks for replying in my thread!!

Mystik sez I need 25-30mm adapters, I'll be sourcing these!!