Announcement
Collapse
No announcement yet.
help with tire fitment please (no stretch)
Collapse
X
-
Ok then, I think that solves it for me then. Probably stick with 16x8 et25 and run 225/45 all the way around, with a fender roll only
-
Fronts poke out a teeny bit because I have spacers to clear the coilovers.
My fronts have a stretch on them btw 205/45
And my wheels were turned so that's why they look like they poke out a lot
Leave a comment:
-
Originally posted by illest318i View Post
Leave a comment:
-
-
225/45 will be pretty square and look perfect. No pulling required just a flat roll.
I'll post pics of mine in a little..
Leave a comment:
-
Originally posted by I8UR911 View Post245/45 would not be right..... too tall of a tire. You'd need a 245/40 or 245/35. I've looked around and can't find anything decent in that size.
Sent from my SCH-I535 using Tapatalk
Leave a comment:
-
245/45 would not be right..... too tall of a tire. You'd need a 245/40 or 245/35. I've looked around and can't find anything decent in that size.
Sent from my SCH-I535 using Tapatalk
Leave a comment:
-
Thanks again for all the help!!! I just want to make sure I have somewhat of enough tire to get the e30 moving when the cammed s52 gets put in.
Leave a comment:
-
Here are my 16x7.5's with 225/45 These are at et30 I think. My lips are not rolled and if I went any wider on the offset I would definitely need to roll'em.
Leave a comment:
-
I ran 225s on a 7.5 inch rim before, offset was et20 with a 10mm spacer. Had a light pull and roll for the rear and would still rub when I accelerated hard.
I could live with that bit of rubbin but, I know alot of other people are annoyed by that.
Hopefully that helps you for your tire selection, good luck.
Leave a comment:
Leave a comment: