Baby needs shoes.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 914Driver
    Noobie
    • Apr 2006
    • 35

    #1

    Baby needs shoes.

    Perhaps the wrong Forum, is so please move it.

    I want to replace the 14" bottle caps from my e30 and put on 15s. Are there any factory wheels, even non-BMW that have the same 4X100 and 4.5 backspacing that can jump right on?

    Suggestions/recommendations for replacements? I didn't see anything in this board's classifieds.

    Thanx, Dan
  • Snowmann
    E30 Addict
    • Jan 2004
    • 459

    #2
    haha a porsche/vdub guy

    alas the 4.5 backspacing

    most e30 wheels u find will be measured in ET in milimeters, which I believe is off of center iirc


    stock there are the 'euro weaves' find joe318is on here and he has a set that he probably would part with for the right $$$

    They look just like the basketweaves but are 15x7 not 14x6.5

    Other than that there are a plethora of 15" wheels that will bolt right up...

    I believe on a 15x7 you'd be looking at et20'ish Correct me if Im wrong, Ive never had 15's, nor 7" wide rims

    Comment

    • Mystikal
      Moderator
      Wheel Fitment Expert
      • Nov 2003
      • 9602

      #3
      Factory? Just BMW. The combination of low-offset and 4x100 leaves us all alone, really.

      There are the 15" BBS basketweaves, and the 6-spoke Style 10s. Both OEM wheels, both often for sale somewhere.

      Comment

      • 914Driver
        Noobie
        • Apr 2006
        • 35

        #4
        I bought 15 X 7 Diamond Racing wheels. NFG. The rears are fine but the fronts won't go under. I rolled the fender a bit (notice the paint chips) but that's not enough.



        Bottle caps with Apex springs.


        If you see or hear of anything 15" that will help me, shoot me a PM.

        Thanx, Dan

        Comment

        • 2002maniac
          R3V Elite
          • Feb 2005
          • 4260

          #5
          You got the wrong backspacing. There is probably an inch of clearance between the tire and strut tube.

          Comment

          • 914Driver
            Noobie
            • Apr 2006
            • 35

            #6
            Yep, 1 1/8 - 1 1/4 inch; but even that won't bring the outer edge of the tire inside the wheel well. I think the Diamond wheels and Kumho tires are going down the road to another owner.

            Dan

            Comment

            Working...