will 16x7 with 38 offset fit

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • cheades
    replied
    17" gives it extra clearance on the strut to run a slightly higher offset. BUT it seems like each e30 is unique, my 17x7 et33 didn't rub on my car but when I traded them to another e30 they rubbed without 5mm spacers.

    Leave a comment:


  • formula driver
    replied
    You dont NEED spacers....I was running 17x7 et38 wheels with 225 tires. They fit fine. I just added 20mm spacers though and I would love to have another 5-10 mm's but Id never go with that thick of a spacer. Get em from turnermotorsports.com

    There pricey and you'll have to buy longer studs, lugs, and centering rings. try em without spacers first and see if you like it. You prolly wont but you can get away with it. They just look like there sucked inside the fenders. The wheels in my sig are 17x7 et38 with no spacer. Im assuming the inch less of rim you have isnt gonna change things to much!

    Leave a comment:


  • 318wa
    replied
    Im assuming that I will need spacers for the front and back?

    Leave a comment:


  • 318wa
    replied
    The tires are 205/50

    Leave a comment:


  • Erick
    replied
    BMW set the offset of 15x7s at ET24, so yeah. For 7" wheels, the ideal offset is 24. It lowers for every inch wider you go.

    Leave a comment:


  • browntown
    replied
    who makes 10mm spacers? I'd go for 15mm H&R's, they sell 8mm that are much cheaper, but it might be really close depending on tire size. Bigger the spacer -- more wheel will be pushed out to fenders. I believe ideal net offset (wheel offset minus spacer size) is 25 for 7" wide rims.

    Leave a comment:


  • Erick
    replied
    If you dont use them with a wheel that has such a high offset, the wheel will hit the strut.

    Pepboys started selling spacers recently, but if you really want the good stuff, you could get the H&Rs.

    You might need longer lugs or a stud kit for 20mm wheels, probably for 10mm as well.

    Leave a comment:


  • 318wa
    replied
    Thanks for the reply. What happens if you dont use the spacers? I work at a machine shop would I be able to make the easily or just save the trouble and buy them? IF so where is a good place to buy them.
    Last edited by 318wa; 09-12-2006, 09:21 PM.

    Leave a comment:


  • Erick
    replied
    You would need 10mm spacers.

    Leave a comment:


  • 318wa
    started a topic will 16x7 with 38 offset fit

    will 16x7 with 38 offset fit

    Just wondering if anybody can tell me if 16x7 wheels with an offset of 38 would fit. Could get a good deal on some but wasnt sure if they would fit, thanks.
Working...