16x8 et32

[hakstern]

I just purchased some wheels and was wondering will i need spacers with a +32 offset? Will I like our top far?

[ak-]

Front yes.
Rear, probably not but you might as well - it will be sunken in.

[hakstern]

Front yes.
Rear, probably not but you might as well - it will be sunken in.

How many mm would you recommend? 15mm all around? 25mm?

[ak-]

Can't call it without knowing your tire size.

My advice is look at the wheels/tire thread and check out people's 16x8 and et wheel fitment and purchase accordingly.

Personally I would shoot for the final et0 to et20 range (mind the camber and tire size)

[hakstern]

Can't call it without knowing your tire size.

My advice is look at the wheels/tire thread and check out people's 16x8 and et wheel fitment and purchase accordingly.

Personally I would shoot for the final et0 to et20 range (mind the camber and tire size)

Thank you. Looks like I’ll be running adapters instead @25mm. This will make it 16x8 et7 all around. Not going for the stance look so I’ll be doing 215/45/16 all around. I’ll be rolling the fenders to make sure they’ll clear. Hope this will work fine for me.

[ak-]

I'd go with 20mm for that tire size. The rear will be a close fit.

[hakstern]

I'd go with 20mm for that tire size. The rear will be a close fit.

Would you say 20mm all around with 205/50/16’s?

With 20 mm spacers, it would be 16x8 +12mm