Squeezing a set of Koseis on - 16x7.5, et43 - 15mm spacer enough?

[speedblind]

From what I've read on the forum, I know I'll need a spacer. My question - is 15mm enough for a 16x7.5 et 43 wheel? 20mm seems like a lot of spacer for a track application.

These were originally on a Civic, so I'm assuming I'll need rings as well. The ideal situation would be to have the wheel as centered as possible so I can fit some wide tires on it, but if I have to cheat one way or another, I'd like the wheel out further.

BTW - the car will be running Turner wheel studs. I'm assuming the 75mm length will do it.

Thanks for the feedback. It's hard to measure clearances with all the hubs off the car.;)

[2002maniac]

you will probably need a 20mm spacer in front

[speedblind]

Wow, that was QUICK! Thanks for the reply. Should I be worried about track duty with a 20mm spacer?

[blueapplesoda]

i run track every month 20mm spacers all around with studs ive got no problem. as long as theyre good hubcentric spacers ull be fine.