I need 5mil spacers

[Mystikal]

I'm running 8mm hubcentric H&R's with my Borbets, and I think that's the smallest any company makes hubcentric spacers (5mm).

H&R "hubcentric" 5mm and 8mm is bullshit. The spacers cannot have hub lips, so they are not hubcentric on an E30 at all.

For 57mm in/out, 15mm is the minimum produced. This is why I either use 3mm spacers, or shoot for 15mm.

And Josh, aren't your wheels like ET35? Run 15mm spacers and be done with it, they will work fine.

[Erick]

I've been doing fine with stock lugs and 6mm spacers.

[Hick]

whats the largest i can go without having to replace the factory lugs?

[egk2]

Ya, I don't see the point of getting 5mm spacers. That's only like a 1/4".

Point is when you run let's say, 16x9's et15 without spacers the wheels will contact the strut housings.

2002maniac, not so sure you're right, if you put 5mm non hubcentric spacers on it would make it flush and the wheel would have nothing to hang on.

[Dave]

Ya, I don't see the point of getting 5mm spacers. That's only like a 1/4".

I have 3mm spacers. If I didn't, the tires would rub the front strut housing.

So yeah, that's the point.

[Jand3rson]

I want to move out to 10mm, but I'll probably have to roll my fenders before I can do that, 2mm might be just that little bit too far.

[Erick]

Pep boys sells 6mm spacers.... I'm rocking them out in the front right now.

[Jand3rson]

I got my 5mm "hubcentrics" from tunershop, very hard to find a hubcentric
spacer that thin.

I'm running 8mm hubcentric H&R's with my Borbets, and I think that's the smallest any company makes hubcentric spacers (5mm).

[AndrewBird]

Ya, I don't see the point of getting 5mm spacers. That's only like a 1/4".

[2002maniac]

very hard to find a hubcentric
spacer that thin.

because it doesnt really matter. With spacers that thin the hub will stick out past the spacer in to the wheel anyway.

[egk2]

I got my 5mm "hubcentrics" from tunershop, very hard to find a hubcentric
spacer that thin.

[Hick]

im not too sure what i need right now, havent looked too much at the car... dont want to put studs in it

[PeaveyBassist]

PM Dave. I think he got 3mm spacers or something.

Will

[Hick]

where to look!!!

well spacers in general.