Susp/Wheel/tire Question

[EWAustin]

OK, last thread like this, I promise.

I've got an '87 325is. In a couple weeks here it will have Ireland Engineering Stage 3 springs on it.

I have Wolfrace 15x7 wheels in 4x100 with an ET 37, and centerbore of 69.

I want to run Hankook Ventus Z212 RS-2 in 225/45-15.

Will it fit?

I believe that I'll need 17mm hubcentric spacers. Right?

[e30sd]

need hubrings too. e30 4 lug center bore is 57 mm.

17mm spacers? good luck. 15mm should put you at 22, which is perfect.

http://www.turnermotorsport.com/html/detail.asp?PRODUCT_ID=30234571

[EWAustin]

OK, so a set of those and some hubcentric rings for 57-69mm and I'll be set, right? Or do they make the spacers and rings in one piece?

and 225/45-15 Hankooks will fit under there?

[e30sd]

might have to roll the fender lips a touch, but it shouldnt be too much of a problem. in contrast i ran 225/50/15 on 15x7 et17 k1's. no rubbing, no rolling. you might need a bit of a fender roll due to the tires being closer to the fender.