Announcement

Collapse
No announcement yet.

Can i fit 16x8" et 15 rims W/ 215/40's on my car?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Can i fit 16x8" et 15 rims W/ 215/40's on my car?

    The car also has IE3 springs on it. thanks

    #2
    Are they slipstreams?

    My guess is you are gonna need to roll or trim the rear and or maybe the front fenders. 215/40 is small for the car, I'd suggest a 45 series.
    '88 528e /// '88 M5 /// '89 951 /// '98 E430 /// '02 M5

    Comment


      #3
      The stretch guys use that tire on a 9" wide... so you should be fine with an 8.
      Erick Mahle | FullOpp Drift | YouTube
      EurostopUSA | Dunlop Tires | Ireland Engineering | EnthusiastApparel | Ground Control

      ..::Support FullOpp::..
      FullOpp Stickers for sale!
      NEW | Enthusiast Apparel T-Shirts! | NEW
      Feedback Thread

      Originally posted by Mr. Anderson
      ...one of the most hardcore E30's around. :D

      Comment


        #4
        Should be fine, just dont try without rolling your fenders

        Comment


          #5
          With rolled fenders it'll fit easily.

          Comment


            #6
            I personally run a 225/45/16 hankook ventus rs2 on 16x7s. I have no rub issues, but my offset is greater, et27 i believe.
            --Will

            Comment


              #7
              I run 225/40-16's on a 16x8 et20 with no issues at all.

              I think a smaller tire with a slightly more aggressive offset will be fine.

              Comment


                #8
                yes they will fit with minimal rolling. im running 16x8 et0 with 215-40s. im a lot lower than IE3's. i had to roll a good amount but with et15...not too much


                Originally posted by rwdrift
                Back to E-Rich's car and drifters. His car is baller, purpose built. Posers are fags. KA-Ts suck. I like beer. And I need monies.
                - Erick

                Comment

                Working...
                X