Could I fit 16X8 and 16X9, 45 offset on the front, 41 on rear, with a 33mm adapter. The adapter is to go from 5X114.3 to 4X100. I'm running H&R Race with billysports.
Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
what's the worst thing that can happen to my e30 rolling with 16x9 -20mm fronts and -15mm rears? wheel bearings messin up?
sigpic
What's Crackiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiin?
http://www.youtube.com/watch?v=ZnaiAh9hbzs
http://www.youtube.com/watch?v=5SSh9an26Ac
http://www.youtube.com/watch?v=vLgBCQUMOdo
http://www.youtube.com/watch?v=BeasDMXRfGM
http://www.youtube.com/watch?v=lhFVxnNmiIY
Comment
-
Originally posted by golde30 View Post5 lug adapters are 20mm minimum. so you would be at +40 again running a +20 wheel, same situation.Last edited by e30s52; 01-14-2009, 03:59 PM.
Comment
-
Asking this for my cousin.... could be just a little extreme
17x9.5 all around. Though they are 5 lug and have a backspacing of 7&1/2in Would they work in any way lol? 5 lug swap?, or huge adapters?, stretched tires and pulllllled fenders. His car is a 91' 318i btw.
Only reason he's asking is because they are at the shop he works at and he can pick them up for cheap.
:crazy:
Comment
-
Second opinion....
OK, looking at really affordable set of 17x7's 45et to run 235's, but hoping to find something wider that fits. Pretty sure there are some 245's out there, but not many?
Is there anything wider that works?
Figure on 20mm spacers? Fenders are already rolled.
On GC coils, so I can adjust height.
Advice?
Tire suggestions?
Just boosted the bitch, so I need as much rubber as possible.
J.J. Farina
Yeah, thats me kicking up all that dirt!
Comment
-
So..lets say I have a buddy that will give up some tires that have about 60 miles on them but they are 235/40 17's. Can I get these on 17x7's? Balloons ftw ehh? He actually has a pair of 215/40 and 235/40
The wheels are et40 or 42 and I'll be running 20mm spacers.
Also..anyone have any experiences with the Falken 452's?
Comment
-
Originally posted by Rodoni View PostHey jay,
Couple questions, I have a 15x7 fitipaldi/OZ wheel, et28 going to be bored to 4x100, my 89 325is is lowered on IE stage 3 springs with billy sports. I want a tire that is going to fill up the fender gaps really well and also want to pull the wheels out a bit. What would you suggest? Thanks in advance
Alex
Comment
-
Originally posted by Gobig_us View PostCould I fit 16X8 and 16X9, 45 offset on the front, 41 on rear, with a 33mm adapter. The adapter is to go from 5X114.3 to 4X100. I'm running H&R Race with billysports.
Comment
-
Originally posted by OBEY View Postwhat's the worst thing that can happen to my e30 rolling with 16x9 -20mm fronts and -15mm rears? wheel bearings messin up?
Comment
Comment