Originally posted by briz
View Post
Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
Originally posted by Massimo View PostIm finding it hard to find info on bbs and oz racing wheels anyone else have this kind of trubble?
Anyways i noticed that the bbs LM come in 17x8 and wanted to know why no one has them. cos obviously if they fitted the e30 a few people would have them. Is there a way to make them fit?
Thanks Massimo
Comment
-
Originally posted by mops View PostHm....
wouldnt it be beneficial to make a table or some guide, what would fit e30 without any mods, and what would require fender rolling...
eg. 17x7.5 wheel will require et20 and up to 215x40x17 should be sweet without rolling...
than say 16x8 will require etXX tires xxxXxxXxx will require rolling, etc....
or a tleast rough guide ?
cos i see people asking the same questions all the time....
The fact is, there are way too many variables. I cannot make any sort of table that is not so vague/cautious that it becomes useless. Plus...I don't mind doing this. My charity act.
Comment
-
Thank you sir! Actually, neither the M3 nor the 325, it's a 318iS with ... slight modifications. A different engine, Motul shocks, IE coilovers.. I'll keep the ride height reasonable (about 25-30mm below a stock 325i with non-sport suspension) and I was planning to run RE050A PPs and/or RE01Rs. The rim as I said would be 7.5Jx17 ET25. Of course if you tell me that the RE01Rs will fit, I'll find a shotgun and shoot myself in the face, since I just sold a set or RE01Rs in 235/40-17 since I was persuaded they wouldn't fit... about 40% below replacement cost.
Comment
-
Originally posted by nmlss2006 View PostThank you sir! Actually, neither the M3 nor the 325, it's a 318iS with ... slight modifications. A different engine, Motul shocks, IE coilovers.. I'll keep the ride height reasonable (about 25-30mm below a stock 325i with non-sport suspension) and I was planning to run RE050A PPs and/or RE01Rs. The rim as I said would be 7.5Jx17 ET25. Of course if you tell me that the RE01Rs will fit, I'll find a shotgun and shoot myself in the face, since I just sold a set or RE01Rs in 235/40-17 since I was persuaded they wouldn't fit... about 40% below replacement cost.
Comment
-
Originally posted by nmlss2006 View PostAAAAAAAARGH! Thanks for the information, that's actually very helpful, though now I get to buy the same tyres again. Maybe with RE01Rs I'll be able to use something lower than fourth gear: for some reason, 195/65-14 MXVs from 1993 on bottlecaps seem to be somewhat lacking in traction.
Comment
-
Okay this has probably been asked in here before but I don't imagine I'll have much luck finding it.
I need new tires for my Ronal LS' 15x7.5 et25. I was thinking 225/50/15 hankook ventus RS-2's. I am lowered about 1.25'' on the cheesy tokico suspension and my fenders are not rolled.
What do you think am I going to have any rubbing issues? Should I go smaller?
Comment
-
Originally posted by Tavern Gnome View PostHey Jay, I have a set of BBS RZ378s on the way, I believe they are the same as yours. What are your recommendations for good performing tires that will fit on the 15x7s? Not looking to spend a ton but I'm not terribly poor either. Thanks!
Ryan
;)
Comment
-
First off sorry for the late replies coming now guys, I'm in the middle of finals and, well, studying makes more sense than being here. :p
Originally posted by Tavern Gnome View PostHey Jay, I have a set of BBS RZ378s on the way, I believe they are the same as yours. What are your recommendations for good performing tires that will fit on the 15x7s? Not looking to spend a ton but I'm not terribly poor either. Thanks!
Ryan
If you want the beefy 225/50/15 look (see my pics), the only tire I'd recommend is the Falken 912. Not only is it a nice tire, but it runs 0.2" narrower than other 225s. This is enough to make a huge difference in fender clearance, trust me. Even with the 912, you may still have to very slightly roll the rear fender lips, depending on suspension.
Comment
-
Originally posted by Jesse30 View Posti have 16x9 borbet type t's with a 10mm spacer up front and 3.2 degrees of negative camber up front and 1 degree out in the back. im wondering if i'll be able to stuff 225/45/16 toyo T1R's on them.
But...the rear most likely won't. That, I do know.
Comment
-
Originally posted by maniacmatt View PostOkay this has probably been asked in here before but I don't imagine I'll have much luck finding it.
I need new tires for my Ronal LS' 15x7.5 et25. I was thinking 225/50/15 hankook ventus RS-2's. I am lowered about 1.25'' on the cheesy tokico suspension and my fenders are not rolled.
What do you think am I going to have any rubbing issues? Should I go smaller?
So, I'd suggest going smaller. Or if you really want 225's, the BFG G-Force Sport is known to work and is honestly a pretty similar tire to the R-S2.
Comment
Comment